Ademco - 4193SN Serialized Interface Module (SIM)

Several of you have written us to ask that we reconsider this decision We have Tech Man Subscriber apologizes for any misunderstanding that has arisen due to our recent to have our technical information removed from the Tech Man web site You appreciate that one of our key concerns is to provide installing security dealers with and accurate information on our products and we were concerned about the data to the Tech Man web site For obvious reasons we also do not wish unauthorized to have access to information on installing and configuring ADEMCO These concerns were what prompted us to ask Tech Man to stop posting installation instructions and user manuals will not require Tech Man to remove the ADEMCO data ADEMCO however is responsible for the operation and maintenance of this site thus we cannot guarantee timeliness or accuracy of the information posted on the Tech Man web site data about our products You may request a PIN number for access to the Technical Support web site and FAXBACK system you need assistance on troubleshooting or if you have other technical questions our products not addressed in the information posted at our web site please contact Technical Support at 800 645 7492 ADEMCO web site is located at www ademco com and contains accurate you for understanding Lustig SKIN CD 12 30 97 10 10 AM Page 1 Instructions Serialized Interface Module SIM 4193SN is a serialized two zone expander used to connect alarm sensing to controls which support serial number polling loop devices i e Vista Vista 50P and Vista 100 4193SN can be configured as one supervised zone 10K EOLR and one zone or two unsupervised zones normally closed devices only the control panel installation instructions for programming information Specification as supplied from the Ademco control panel for polling loop LOOP 1 SUPERVISED EOLR 10K LOOP 1 UNSUPERVISED LOOP 2 UNSUPERVISED COMMON Diagram Fire Applications 4193SN must be mounted inside the control panel cabinet or inside a UL junction box Loop 1 must be used in the supervised configuration for Loop 2 may be used for Burglary UL Burglary Applications using an unsupervised zone of the 4193SN the unit must be mounted within 3 of the alarm initiating device with no intervening barriers SKIN CD 12 30 97 10 10 AM Page 2 Serialized Interface Module SIM For connecting alarm sensing devices and switches to multiplex polling loop control panel with SERIAL NUMBER device capability 1 ea Vista 40 etc control panel instructions for compatibility