Ademco - 57L-T Overhead Door Contact

ABEMCOJ AND WIRING Mount the switch housing on the floor as close as possible to the inside of both the door and the door frame Bend the flexible armor so that the wires are led to the side of the door where the protective circuit is to be Mount the magnet on the door so that it extends out over the switch housing The magnet should line up the two raised lines on top of the switch housing and be installed so that an alarm is actuated before a r opening is reached two longer they are the switched pair in series with the positive side of the protec a Connect up Connect two shorter they are the continuous pair in series with the negative side of the pro circuit or alternatively in a separate tamper loop ARMOR LOOP SEPARATE SHOUU BETWEEN RAISED LINES HOUSING DEllICE MANUFACTURlNG oMsa9Q Eileen Way Syosset New York 1179 l 3 82 8 1982 CORPORATION