Ademco - 957 Series Overhead Door Contacts

CATALOG NO GAP CONDUCTORS JACKET SPDT Mount the switch housing on the floor as close as possible to the inside of both the door and the door frame Bend the tubing so that the wines are led to the side of the door where the protective circuit is to be picked up Mount the magnet on the inside of the door so that it extends out over the switch housing An optional junction box No 58 is available The No 58 Junction Box contains a terminal strip which may be used as test posts and as connection points for the protective circuit Contact Configuration For the single pole single throw models simply wire the leads in series with the positive leg of the closed circuit For the single pole double throw models the white wire is common the black wire is used in closed circuits the green wire is used in open circuits MAGNET 1 MAGNET 1 J I 2 MODELS DEVICE MANUFACTURING Eileen Way Syosset New York 11791 384 0 1984 PIllWAY 388