Ademco - Vista 20SEa Installation Manual (Australian)

First page of this international document resides under separate cover 20SEaCOV ps TABLE OF CONTENTS 1 GENERAL DESCRIPTION THE CONTROL 2 the Cabinet the Lock if used the Mains Transformer the Back Up Battery Ground Connections 3 REMOTE KEYPADS That May Be Used The Keypads Keypad Settings A Supplementary Power Supply To Power Additional Keypads Check Out Procedure 4 MECHANICS OF PROGRAMMING Programming Information Programme Mode a Data Field a Data Field Erasing an Entry in a Data Field Mode Programming Q 56 Q 80 Q 82 and Q 83 Factory Defaults System Setup Fields the Programming Mode 5 BASIC WIRED ZONES 1 the Basic Wired Zones Characteristics For Zones 1 Burglary and Panic Devices to Zones 1 Resistance Supervision on Basic Wired Zones 2 2 Wire Smoke Detectors in Zone 1 Operation of 2 Wire Smoke Detectors in Zone 1 Off Fire Alarm Sounding 4 Wire Smoke Combustion Detectors in Zones 2 Basic Wired Zones 6 WIRED ZONE EXPANSION 4219 4229 Zone Expansion Units and Set Up Wired Expansion Zones 7 WIRELESS ZONE EXPANSION 5800 SYSTEM Information Supervision Identification Series Transmitters Supervision Input Types Battery Life the Receiver and Transmitters the Transmitter Sniffer Mode Either Temporarily or Permanently Remove a Zone From the System a Transmitter Serial Number From a Zone in Q 56 Mode Series Transmitters Table 5800 Series Transmitters Go Test Mode DIP Switches on the 5827 Transmitter s 8 RELAY OUTPUTS POWERLINE CARRIER DEVICES Carrier Device Basics And 4229 Output Relay Modules Carrier Devices Connections Options Defined Output Relays and Powerline Carrier Devices VIP MODULE Information Module Wiring The Control for Phone Access 9 10 ALTERNATIVE COMMUNICATIONS MEDIA Information 11 AUDIO ALARM VERIFICATION AAV UNIT Information Connections 12 FINAL POWER UP Power Up the Back Up Battery the Battery Size Needed the Battery Connections Device Current Drain Worksheet