AIPHONE JK-DA JK-DV JK-DVF MANUAL

FK1461 P0109YI JK DV JK DVF door station de Porte Vid Portero Videocitofonica esterna video door station vid r au vandalisme portero antivand met inox antivandalisme videocitofonica esterna agli atti vandalici door station de porte vid portero met kunststof videocitofonica video door station vid r au vandalisme portero antivand met metalen videocitofonica esterna agli atti vandalici MANUAL D DE INSTALACI D General Prohibitions Prohibition to dismantle the unit Prohibition on subjecting the unit to Water General Precautions WarninG caution could result in death or serious injury Do not dismantle or alter the unit Fire or electric shock could result Existing wiring such as chime wiring etc may contain high voltage AC electricity to the unit or electric shock could result Wiring and installation should be by a qualified technician This unit is not an explosion proof unit Do not install or use the unit in locations are filled with flammable gas such as oxygen rooms Fire or an explosion could could result in injury to people or damage to property Before turning on power make sure wires are not crossed or shorted If not fire or shock could result Do not install or make any wire terminations while power supply is plugged in It cause electrical shock or damage to the unit Precautions The door station is weather resistant but do not spray high pressure water on door directly Unit trouble could result 1 PacKaGe contents JK DA panel unit screws Mounting screws x 2 Wood mounting screws x 2 MANUAL JK DV JK DVF screws x4 anchor bolts x4 screwdriver screws x4 nameplates x 2 mount back box 2 Mounting locations not install video door station in any of the following locations where lighting or the ambient environment could impact the display on the monitor due to the characteristics of the door station camera Locations subject to direct Under street lights or door Other locations subject to strong or backlighting conditions 2 Mounting positions and image view area Wide picture mm 5 Zoom picture Objects appear smaller due greater distortion in the sections compared the central section but a area is displayed The display range is a rough and may change to the installation Mounting position mm 5 position mm 4 3 center 1,800 mm 11 1,050 mm 3 5 mm 5 750 mm 5 mm 20 mm 20 center mm 4 3 Wide picture 2,000 mm 7 1,050 mm 3 5 950 mm 2 170 An area over a range of approx 170 in a 500 mm 20 radius from the camera displays display range is a rough estimation may change due to the installation 700 mm 2 3 900 mm 3 The zoom position can be changed to the master station operation manual The factory setting is Center for Zoom mode Zoom picture when mounting position is 1,500 mm 5 Up Center 2,250 mm 5 850 mm 2 1,400 mm 7 1,850 mm 1 center 700 mm 3 1,150 mm 9 Down mm 20 1,600 mm 4 center mm 5 850 mm 9 center mm 5 mm 20 mm 5 mm 20 750 mm Left Center Right mm 20 mm 20 mm 100 mm 4 mm 4 3 900 mm 3 mm 4 3 100 mm 4 cable PVC jacket with PE polyethylene insulated cable is Never use individual conductors twisted pair cable or coaxial Wiring distance 0.65 mm AWG m 1.0 mm m AWG 3 3 MountinG Removing the unit from the frame the main unit the locking screws Screwdriver unit UP upwards box x 2 mm Mount the main unit on mounting frame and fit front panel on the front panel surface panel unit off the front panel with flathead screwdriver frame hole not block the holes front panel 6 mm 1 4 mm Drainage hole not block the holes front panel mount box mm mm Mounting x 4 mm 4 the transparent nameplates the transparent nameplates Remove the vandal resistant front panel Peel off the protective seals on the plate both sides Fill in the name of the resident on the transparent Be sure to leave 25 mm 1 of white space on the left end account for insertion Insert the filled in transparent nameplate at the specified opening indicated with in diagram mm bolts x 4 mm mm the transparent nameplates the transparent nameplates Remove the vandal resistant front panel from the mount back Peel off the protective seals on the plate both sides Fill in the name of the resident on the transparent nameplate Be sure to leave 25 mm 1 of white space on the left end to for insertion Insert the filled in transparent nameplate at the specified insertion opening on the rear side of the vandal resistant front panel indicated with in diagram mm 4 WirinG A2 non polarized Door station is weather resistant However do not spray high pressure water on station directly Unit trouble could result 5 tecHnicaL Precautions precautions Operating temperature 10 cid 155 C to 60 cid 155 C 14 cid 155 F to 140 cid 155 F Cleaning Clean the units with a soft cloth dampened with a neutral household Do not use any abrasive cleaner or cloth 6 sPecifications Camera unit Scanning lines Minimum subject Dimensions metal oxide semiconductor lines Lux at 50 cm 1 distance Weight 190 g 0.42 lbs 650 g 1.43 lbs 580 g 1.27 lbs mount back box Approx 450 g 1.0 lbs H x 97 W x 35.5 D mm H x 3 7 8 W x 1 7 16 D inches H x 98 W x 29.5 D mm H x 3 7 8 W x 1 D inches H x 135 W x exposed area 8 D mm H x 5 5 16 W x 5 16 D inches mount back box 180 H x 110 W x 45 D mm H X 4 3 8 W X 1 25 32 D inches 5 warrants thats its products have no material or workmanship defects under normal use conditions for two years after delivery to the end user Aiphone will perform repair replacement free of charge if the pro