Andover Controls Continuum Enclosure and Display Module System

NEMA 1-Style Enclosure for Installation of Continuum Intelligent System Built-in DIN Rails for Easy Mounting of CPU, Power and up to 10 I/O Convienent Front Door of up to 9 Local Display Durable Steel Welded Built-in Cable Management Streamline and Wiring Runs and Display Module System Continuum NEMA 1-style enclosure provides a convenient way to wall-mount an Continuum intelligent building system in a single location and is uniquely styled match your Andover Controls Continuum product line. The enclosure makes initial and future change-outs of the Continuum modules quick and easy; provides for technicians and protection from environmental elements; and offers front door mounting of the Continuum LED and LCD local display modules. MODULE INST MODULE INST MODULE INSTALLAALLAALLAALLAALLATIONTIONTIONTIONTION MODULE INST MODULE INST six-inch deep enclosure provides room to mount the Continuum NetController CPU, power supply, and up to ten modules on three built-in DIN rails. The DIN rails are attached to a removable steel back plate, which allows to mount the actual enclosure separately from the Continuum modules. Simply hook each module onto the DIN plug the built-in power/communications connector on the left side of each module into the complimentary on the right side of the previous module, and then snap-close the quick-release fasteners to lock the in place on the rail. It that easy! I/O modules, if needed, can be located in additional Continuum enclosures. In addition, a single I/O module or of I/O modules can be located outside an enclosure, for example, to control a remote door or lighting system. additional I/O modules are connected to the Continuum system using approved cable and an external 24VDC supply. DESIGN DESIGN DESIGN DESIGN DESIGN enclosure welded design and rugged cold-rolled steel construction ensure durability. Vertical support bars on inside of the cabinet door provide added rigidity and a built-in door lock guards against tampering. Cable troughs underneath each DIN rail streamline and protect wiring runs. A bracket for two 12V 7.0 AHr rechargeable batteries is provided at the bottom of the enclosure for UPS support. DOOR DISPLAY AND CONTROL MODULES DOOR DISPLAY AND CONTROL MODULES DOOR DISPLAY AND CONTROL MODULES DOOR DISPLAY AND CONTROL MODULES DOOR DISPLAY AND CONTROL MODULES front door of the enclosure contains removable sections into which the Continuum display and control modules be mounted. These modules LB-8 LED Bar Module, LS-8 LED 3-Digit Module, LC-1 2-Line Display with VM-1 Voice Module, and the GA-40/80 Graphic Annunciator Panels secured directly into the back of door with screws and connected to the I/O bus by a five-conductor cable assembly. The Continuum system treats these display modules as additional I/O modules. Up to nine display modules can be mounted on the Mix various combinations of display modules to meet your specific operator interface needs. Alternately, the can be ordered with only three tinted Plexiglas panels in the door. This option allows you to view the lights of all internal modules when the enclosure door is closed. Manuals Online! – LED BAR MODULE LED BAR MODULE LED BAR MODULE LED BAR MODULE LED BAR MODULE 8 user-programmable LED ON/OFF indicators 8 user-programmable push-button digital inputs LB-8 LED Bar Module provides a cost-effective way to view and modify your facility operation with 8 programmable LED each with its own programmable companion push-button with audible feedback. The LB-8 is an excellent choice for equipment status indication, ON/OFF control, and override capability. Programming the LED indicators and push-buttons is with Andover Controls Plain English programming language. Labels above each LED and companion push-button allow you customize each I/O point. LED 3-DIGIT DISPLAY MODULE LED 3-DIGIT DISPLAY MODULE LED 3-DIGIT DISPLAY MODULE LED 3-DIGIT DISPLAY MODULE LED 3-DIGIT DISPLAY MODULE 8 user-programmable, 3-digit, 7-segment LED displa