Cerberus Pyrotronics MHST Multi-Tone Horns Temporal Horns with Synchronous Stobes 2535

MHST Horns Horns with Synchronous Strobes AND ARCHITECT SPECIFICATIONS Horns and Strobes on a Pair of Wires from Single Two Gang 4 or Surface Back Mounting Synchronous Strobes with Temporal 3 Horns Screw Terminals Accept up 12 AWG Available in Red or Off Color Listed Mounting Mounting w Strobe Gang Mounting Pyrotronics horns and horn strobes provide high electronics for maximum reliability and low current to meet any fire life safety application units are designed for ADA applications and meet latest requirements of NFPA 72 the National Fire Alarm and UL 1971 standards for signaling devices for the impaired Pyrotronics MHST Horns are available in both 4 x 2.75 x 1.33 deep and universal 4.75 x 4.75 x 1.33 deep configurations The mounting version mounts to either a single gang 4 inch square or surface box With the universal models the horn horn strobe mounts to the univer mounting plate with a single screw On all units only terminal strip protrudes from the back of the horn for mounting in virtually any depth box MHST is a temporal Code 3 horn that is synchro to assure all horns in the circuit sound at the same It is controlled by the SCM F controller which is in the notification circuit prior to the first MHST the combination horn synchronous strobe is used SCM F controller can accept input from two signaling horn and strobe circuits The horn strobes are to the controller with a single pair of wires that and synchronize both horns and strobes This also allows for the silencing of horns with strobes in operation all on a single pair of wires from the SCM controller strobe versions utilize a Xenon flashtube with solid state for maximum reliability and efficiency Synchro models are available in 15 15 75 and 75 Candela The top of the strobe has a rounded dome shape of clear Lexan The overall lens height is 2.5 with a of 1.25 S15 model provides 15 cd and is used in non sleeping where lower candela is required per UL 1971 NUMBER S17 model is for non sleeping installations requiring cd output while also providing an ADA compliant 75 cd output for public areas S75 version offers a 75 cd polar output that meets requirements for regular lighted public areas while satisfying UL 1971 in substitution of multiple 15 cd and Horn Strobes 24 VDC No Rating Current Current 6 32 x 5 8 Wiring Wiring Units to be only installed in accordance with the National Electrical Code and local codes Not Loop Wire Cut Wire Run to Provide Electrical Supervision 6 32 5 8 8 32 1 2 x 1 1 4 control panel steady non pulsing silenceable Appliance Circuit or previous silenceable appliance control panel steady non pulsing silenceable Appliance Circuit N A C or previous appliance Mount MHST S S U No Unit Box Red 4 SQ Large Box Red for Universal Mount Models When ordering signals or boxes in white add the letter W to the end of the number e g MHST S15S U is MHST S15S UW in white control panel steady non pulsing silenceable Appliance Circuit or previous silenceable appliance control panel steady non pulsing silenceable Appliance Circuit N A C or previous appliance SCM F or 020Amp and by from fire control SCM F or 020Amp and by from fire control The use of other than Cerberus Pyrotronics notification appliances detectors and with Cerberus Pyrotronics control equipment will be considered a misapplication of Pyrotronics equipment and as such void all warranties either expressed or implied regard to loss damage liabilities and or service problems U Unit Pyrotronics Ridgedale Avenue Knolls NJ 07927 201 267 1300 201 397 7008 www cerbpyro com in U S A Pyrotronics East Pearce Street Hill Ontario 1B7 CN 905 764 8384 905 731 9182 1997 Issue Next EOL Next EOL