Autocall 4007ES Hybrid, Fire Detection and Control Panel with Addressable and_or Conventional Initiation; International

Datasheet Fire Control Units Hybrid, Fire Detection and Control Unit with Addressable and/or Conventional isolated IDNet 2 addressable initiating device SLC: Current and previous panel configuration maintained in on-board ULC, FM Approved* with Autocall ES Net a variety of new and retrofit applications in. (109 mm) diagonal color touchscreen display: Provides detailed system status and point information Supports dual language selection, including unicode character A custom background display appears when operation is normal point zone/relay module: Each point is selectable as an IDC input or Relay output, Class A IDCs two points (one out and one return); one module is standard you can field install up to three additional modules for a total of 8 point zone/relay modules for each system You can configure each point on the IDC/Relay module as a control rated 2 A at 30 VDC (resistive) as either normally open or normally Power comes directly from the power supply or through the optional VDC Regulator Module You can select the IDC end-of-line (EOL) resistor value from a wide of resistance values for retrofit convenience Provides built-in short circuit isolation for monitoring and control of analog sensors and IDNet communications monitoring and devices; for use with either shielded or unshielded, twisted or single pair wiring; outputs are Class A or Class B Standard panel signaling line circuit (SLC) provides up to 100 points; optional additional loop expansion modules an additional isolated loop with short circuit isolation for IDNet 2 channel; each loop expansion module also provides an 75 addressable points supply: with 6 A total available current You can select the NAC EOL resistor value from a wide range of values for retrofit convenience Additional notification power capacity is available using the 4009 IDNet Extender Battery backup charging of up to 33 Ah; up to 18 Ah for cabinet- batteries and up to 33 Ah for batteries mounted close- remote battery cabinet mechanical: Red or platinum cabinet; rated NEMA 1 and IP30 Listings reference: UL 864 – Control Units, System (UOJZ); Control Unit Accessories, Fire Alarm (UOXX); Control Units, Releasing Device Service UL 2017 – Emergency Alarm System Control Units (CO detection), (FSZI) ULC-S559 – Central Station Fire Alarm System Units (DAYRC) ULC-S527 – Control Units, System, Fire Alarm (UOJZC); Control Unit System, Fire Alarm (UOXXC); Control Units, Releasing Service (SYZVC) Additional listings may be applicable; contact your local product supplier for the latest status. Four notification appliance circuits (NACs) selectable as Class A or Class X operation 1: 4007ES Hybrid Unit front view feature summary: An internal Ethernet service port is available for service computer to perform configuration updates, downloads and report downloads, and update system software Internal USB interface allows a memory stick to store job revisions, revised jobs and panel software, and save detailed system from the panel modules and connections include: Fire alarm network interface card (NIC) for ES Net Peer-to-Peer network communications, supports either Class B or Up to two additional IDNet 2 addressable device output loop with short circuit fault protection and with 75 additional capacity each Front mounted 48 LED annunciator with custom label inserts; LEDs programmable for up to 24 IDC zones of alarm and trouble or other custom annunciation requirements Remote LED annunciator support through remote user interface (RUI) port for use with UTP wiring Dual RS-232 ports for printer, PC annunciator or third party interface Alarm relays and auxiliary relays City connections, with or without disconnect switch 4009 IDNet NAC Extenders to extend NAC capability for power and Battery brackets for seismic area protection; see Mechanical for more information