Home » Autocall 4010ES Addressable Fire Detection with IDNAC, Fire Alarm Control Unit and Accessories; International
File preview
Click the button below to download immediately for free
Show text preview
Datasheet Fire Control Units Fire Detection with IDNAC, Fire Alarm Control Unit and Accessories ULC, CSFM Listed, FM, NYC Fire Approved* with Autocall ES Net fire alarm network. system includes: Models available with Color ES Touch Screen Display or Monochrome 2 x 40 Character Display Capacity for up to 1000 addressable IDNet points, and up to 127 Air Aspiration Systems interface points, with up to 2000 points annunciation Capacity for up to 20 internal and external card addresses CPU assembly includes dedicated compact flash memory for onsite information storage an Enhanced System Supply (ESS) that provides power battery charging (6 A output): Dual 3 A on-board IDNAC signaling line circuits (SLCs) with enhanced delivery to addressable notification appliances An IDNAC SLC maintains a constant 29 VDC source voltage during even during battery operation, allowing strobes to operate higher voltage with lower current and ensuring a consistent draw and voltage drop margin under both primary power and battery standby Efficiencies include lower strobe currents, wiring distances up to two three times farther than with conventional notification, support more appliances for each IDNAC SLC, ability to use smaller wiring, all with installation and maintenance savings with high that appliances that operate during normal system testing during worst case alarm conditions IDNAC SLCs are compatible with both TrueAlert ES and TrueAlert notification appliances, and remote 4009 IDNAC to extend power and wiring distance even farther and supervisory capacity by up to 139 additional unit loads or 3 A On-board IDNet 2 dual loop SLCs with addressable initiating device through two electrically isolated channels for TrueAlarm analog and IDNet communications monitoring and control devices an electrically isolated output channel. You can use this with either or unshielded, twisted or untwisted single pair wiring; and it dual short circuit isolating output loops. Battery charger for up to 110 Ah batteries (UL) or up to 50 Ah batteries 33 Ah maximum in control unit cabinet for 1 bay systems, 50 Ah 2 bay systems. 2 A programmable function auxiliary output Remote annunciator module support through Remote Unit Interface communications port, for either Class B or Class A operation 48 LED panel mount annunciation with 40 Red and 8 Yellow LEDs (select models), optional LED kits are available to individual LED color to Green or Blue to meet specific site ESS mounted modules include: City Connect Module Alarm Relay Module Battery brackets for seismic area protection 1: 1-Bay Cabinet 2: 1-Bay Cabinet with LED Annunciation 3: 2-Bay Cabinet block space modules include: Fire Alarm Network Interface Cards (NIC) for ES Net Peer-to-Peer fire network communications, supports either Class B or Class X Ethernet connectivity options include ES Net NIC and BACpac Ethernet Dual Class A IDNAC Isolator (DCAI) Dual RS-232 Module, for printer or third party interface VESDA Air Aspiration High Level Interface Serial DACT 8-Point Zone or Relay Module 4 Point Auxiliary Relay module with or without Feedback Additional IDNET addressable channels with Autocall remotely located: 4098-9757 QuickConnect2 TrueAlarm smoke sensors A4081 Series, 110 Ah Battery Chargers 4100-7400 Series Graphic Annunciators A606-9102 Remote LCD Annunciator, A100-9400 Series Remote ES Screen Displays, A100-9400 Series Remote InfoAlarm Command This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7120-2269:0546, 7272-2269:0537, 7165-2269:0541 and 7165-2269:0542 for allowable values and/or conditions concerning material presented in this document. NYC Fire Dept COA #6272. Refer to 6 and 7 for applicable listings at time of publication. Additional listings may be applicable; contact your local product supplier for the latest status. Refer to specific product listings in tables 5 and
Datasheet Fire Control Units Fire Detection with IDNAC, Fire Alarm Control Unit and Accessories ULC, CSFM Listed, FM, NYC Fire Approved* with Autocall ES Net fire alarm network. system includes: Models available with Color ES Touch Screen Display or Monochrome 2 x 40 Character Display Capacity for up to 1000 addressable IDNet points, and up to 127 Air Aspiration Systems interface points, with up to 2000 points annunciation Capacity for up to 20 internal and external card addresses CPU assembly includes dedicated compact flash memory for onsite information storage an Enhanced System Supply (ESS) that provides power battery charging (6 A output): Dual 3 A on-board IDNAC signaling line circuits (SLCs) with enhanced delivery to addressable notification appliances An IDNAC SLC maintains a constant 29 VDC source voltage during even during battery operation, allowing strobes to operate higher voltage with lower current and ensuring a consistent draw and voltage drop margin under both primary power and battery standby Efficiencies include lower strobe currents, wiring distances up to two three times farther than with conventional notification, support more appliances for each IDNAC SLC, ability to use smaller wiring, all with installation and maintenance savings with high that appliances that operate during normal system testing during worst case alarm conditions IDNAC SLCs are compatible with both TrueAlert ES and TrueAlert notification appliances, and remote 4009 IDNAC to extend power and wiring distance even farther and supervisory capacity by up to 139 additional unit loads or 3 A On-board IDNet 2 dual loop SLCs with addressable initiating device through two electrically isolated channels for TrueAlarm analog and IDNet communications monitoring and control devices an electrically isolated output channel. You can use this with either or unshielded, twisted or untwisted single pair wiring; and it dual short circuit isolating output loops. Battery charger for up to 110 Ah batteries (UL) or up to 50 Ah batteries 33 Ah maximum in control unit cabinet for 1 bay systems, 50 Ah 2 bay systems. 2 A programmable function auxiliary output Remote annunciator module support through Remote Unit Interface communications port, for either Class B or Class A operation 48 LED panel mount annunciation with 40 Red and 8 Yellow LEDs (select models), optional LED kits are available to individual LED color to Green or Blue to meet specific site ESS mounted modules include: City Connect Module Alarm Relay Module Battery brackets for seismic area protection 1: 1-Bay Cabinet 2: 1-Bay Cabinet with LED Annunciation 3: 2-Bay Cabinet block space modules include: Fire Alarm Network Interface Cards (NIC) for ES Net Peer-to-Peer fire network communications, supports either Class B or Class X Ethernet connectivity options include ES Net NIC and BACpac Ethernet Dual Class A IDNAC Isolator (DCAI) Dual RS-232 Module, for printer or third party interface VESDA Air Aspiration High Level Interface Serial DACT 8-Point Zone or Relay Module 4 Point Auxiliary Relay module with or without Feedback Additional IDNET addressable channels with Autocall remotely located: 4098-9757 QuickConnect2 TrueAlarm smoke sensors A4081 Series, 110 Ah Battery Chargers 4100-7400 Series Graphic Annunciators A606-9102 Remote LCD Annunciator, A100-9400 Series Remote ES Screen Displays, A100-9400 Series Remote InfoAlarm Command This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7120-2269:0546, 7272-2269:0537, 7165-2269:0541 and 7165-2269:0542 for allowable values and/or conditions concerning material presented in this document. NYC Fire Dept COA #6272. Refer to 6 and 7 for applicable listings at time of publication. Additional listings may be applicable; contact your local product supplier for the latest status. Refer to specific product listings in tables 5 and