Home » Autocall 4100ES with IDNAC Addressable Fire Detection and Control Basic Panel Modules and Accessories
File preview
Click the button below to download immediately for free
Show text preview
UL, ULC , CSFM Listed, NYC Fire Approved* Fire Control Panels with IDNAC Addressable Fire Detection and Control Basic Panel Modules and providing dual short circuit isolating output loops MINIPLEX Transponder and remote LCD and LED annunciator support RUI+ (isolated or un-isolated) communications port (see Standard Bay Module Details) power supplies (EPS) provide enhanced power delivery SLCs to addressable notification appliances With IDNAC SLCs, a constant 29 VDC source voltage is maintained alarm, even during battery operation, allowing strobes to at higher voltage with lower current and ensuring a consistent draw and voltage drop margin under both primary power and battery standby Efficiencies include lower strobe currents, wiring distances up to 2 to times farther than with conventional notification, support for more per IDNAC SLC, and the ability to use smaller gauge wiring providing installation and maintenance savings with high assurance appliances that operate during normal system testing will also during worst case alarm conditions IDNAC SLCs are compatible with both TrueAlert ES and TrueAlert notification appliances, and remote 4009 IDNAC to extend power and wiring distance even farther modules and connections Fire Alarm Network Interfaces, city connections, and up to five (5) ports for printers and terminals Building Network Interface Card (BNIC) for Ethernet connectivity Side mounted DACT assembly requiring minimal panel space; DACT is with IP Communicators Emergency communications systems (ECS) equipment; 8 channel audio or 2 channel analog audio Additional IDNet 2 communications SLCs, IDNet 2+2 Modules with short circuit isolating output loops; additional power supplies, relays, and auxiliary relays LED/switch modules and panel mount printers; VESDA Air Aspiration interface, ASHRAE BACnet Interface, TCP/IP Bridges Battery brackets for seismic area protection 4100ES compatible legacy interface modules, including control of (non-addressable) NACS 8-point zone/relay module, each point is selectable as an IDC input or output. Class A IDCs require 2 points (one out and one return). rated for 2 A @ 30 VDC (resistive). Configurable as normally or closed. Listings reference: UL 864, Fire Detection and Control (UOJZ), Releasing Device Service UL 1076. Proprietary Alarm Units – Burglar (APOU) UL 2017, Process Management Equipment (QVAX), Emergency Alarm Control Units (FSZI) UL 1730, Smoke Detector Monitor (UULH) UL 2572, Mass Notification Systems (PGWM) Feature Summary provides dual configuration programs Two programs allow for optimal system protection and commissioning with one active program and one reserve; downtime is because the system stays running during download 1: cabinets are available with two or three bays (2 bay cabinet shown) with Autocall ES Net Fire Alarm Networks Controller (top) bay standard equipment 32-Bit Master Controller with color-coded operator interface and switches for high confidence feedback Dual configuration program CPU, convenient service port access, and for up to 2500 addressable points CPU assembly includes 2 GB dedicated compact flash memory for on- system programming and information storage An Enhanced Power Supply (EPS) and battery charger (9 A output) on-board: IDNAC SLCs (signaling line circuit) for addressable control, an IDNet 2 Module for addressable device control; programmable function auxiliary output Also available with InfoAlarm Command Center expanded content user (see data sheet AC4100-0045 ) addressable device interfaces include: 250 point addressable device IDNet 2 SLC that supports TrueAlarm sensors and IDNet communications monitoring and control with an electrically isolated output channel allowing use with shielded or unshielded, twisted or untwisted single pair wiring; This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7120-2269:0546, 7272-2269:0537 and 7165-2269:0542 for allowable values and/or conditions
UL, ULC , CSFM Listed, NYC Fire Approved* Fire Control Panels with IDNAC Addressable Fire Detection and Control Basic Panel Modules and providing dual short circuit isolating output loops MINIPLEX Transponder and remote LCD and LED annunciator support RUI+ (isolated or un-isolated) communications port (see Standard Bay Module Details) power supplies (EPS) provide enhanced power delivery SLCs to addressable notification appliances With IDNAC SLCs, a constant 29 VDC source voltage is maintained alarm, even during battery operation, allowing strobes to at higher voltage with lower current and ensuring a consistent draw and voltage drop margin under both primary power and battery standby Efficiencies include lower strobe currents, wiring distances up to 2 to times farther than with conventional notification, support for more per IDNAC SLC, and the ability to use smaller gauge wiring providing installation and maintenance savings with high assurance appliances that operate during normal system testing will also during worst case alarm conditions IDNAC SLCs are compatible with both TrueAlert ES and TrueAlert notification appliances, and remote 4009 IDNAC to extend power and wiring distance even farther modules and connections Fire Alarm Network Interfaces, city connections, and up to five (5) ports for printers and terminals Building Network Interface Card (BNIC) for Ethernet connectivity Side mounted DACT assembly requiring minimal panel space; DACT is with IP Communicators Emergency communications systems (ECS) equipment; 8 channel audio or 2 channel analog audio Additional IDNet 2 communications SLCs, IDNet 2+2 Modules with short circuit isolating output loops; additional power supplies, relays, and auxiliary relays LED/switch modules and panel mount printers; VESDA Air Aspiration interface, ASHRAE BACnet Interface, TCP/IP Bridges Battery brackets for seismic area protection 4100ES compatible legacy interface modules, including control of (non-addressable) NACS 8-point zone/relay module, each point is selectable as an IDC input or output. Class A IDCs require 2 points (one out and one return). rated for 2 A @ 30 VDC (resistive). Configurable as normally or closed. Listings reference: UL 864, Fire Detection and Control (UOJZ), Releasing Device Service UL 1076. Proprietary Alarm Units – Burglar (APOU) UL 2017, Process Management Equipment (QVAX), Emergency Alarm Control Units (FSZI) UL 1730, Smoke Detector Monitor (UULH) UL 2572, Mass Notification Systems (PGWM) Feature Summary provides dual configuration programs Two programs allow for optimal system protection and commissioning with one active program and one reserve; downtime is because the system stays running during download 1: cabinets are available with two or three bays (2 bay cabinet shown) with Autocall ES Net Fire Alarm Networks Controller (top) bay standard equipment 32-Bit Master Controller with color-coded operator interface and switches for high confidence feedback Dual configuration program CPU, convenient service port access, and for up to 2500 addressable points CPU assembly includes 2 GB dedicated compact flash memory for on- system programming and information storage An Enhanced Power Supply (EPS) and battery charger (9 A output) on-board: IDNAC SLCs (signaling line circuit) for addressable control, an IDNet 2 Module for addressable device control; programmable function auxiliary output Also available with InfoAlarm Command Center expanded content user (see data sheet AC4100-0045 ) addressable device interfaces include: 250 point addressable device IDNet 2 SLC that supports TrueAlarm sensors and IDNet communications monitoring and control with an electrically isolated output channel allowing use with shielded or unshielded, twisted or untwisted single pair wiring; This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7120-2269:0546, 7272-2269:0537 and 7165-2269:0542 for allowable values and/or conditions