Autocall AC4100-1039 Remote Annunciator Panels

UL, ULC, CSFM Listed* Annunciator Panels provide fire alarm control panel information at locations distant from the fire alarm panel functions include: Remote status LED indicators and dedicated switch input controls on LED/switch modules Remote status LED indicator modules with 8 red or 16 (8 red/8 yellow) that are pluggable to allow color selection (yellow, green, or red are ordered separately) Remote microphone and operator interface for access to the voice/alarm communications system Remote master telephone for communicating to the firefighter system Models available with Color ES Touch Screen Display User Interface. optional modules include: Remote Command Center option for LCD status readout and keyswitch functions (for models A100-9610 and A100-9611 without ES Touch Screen Display) 24 Point I/O module RS-232 ports for remote printer or terminal connections Power supplies with battery charger for annunciator Panel mounted printer for system status recording requirements: RUI or RUI+ (remote unit interface) supervised communications the host fire alarm control panel provide Class B or Class X SLC line circuit) pathway connections Microphone and telephone circuits require their own dedicated wiring to: UL 864, Fire Detection and Control (UOJZ), Smoke Control Service Releasing Device Service (SYZV), Emergency Communication Relocation Equipment (UOQY), Control Unit Accessories (UOXX) UL 1076, Proprietary Alarm Units – Burglar (APOU) UL 2017, Process Management Equipment (QVAX), Emergency Alarm Control Units (FSZI) UL 1730, Smoke Detector Monitor (UULH) UL 2572, Mass Notification Systems (PGWM) CAN/ULC-S527 Control Units for Fire Alarm Systems (UOJZ7), Releasing Service (SYZV7), Control Unit Accessories (UOXX7) CAN/ULC-S559 Central Station Fire Alarm System Units (DAYR7) ULC/ORD-C1076 Proprietary Burglar Alarm Units and Systems (APOU7) ULC/ORD-C100 Smoke Control System Equipment (UUKL7) Fire Control Panels Annunciator Panels 1: 4100ES Remote Annunciator in a Three Bay with Audio Operator Modules; Remote Command (left) and with an ES Touch Screen Display (right) Annunciator Panels Annunciator Panels are dedicated purpose transponders that fire alarm system status information. Typical use is when the fire alarm control panel is located away from the area where those to a fire situation need status information. and Control are suitable for firefighter or other fire brigade responders to particular information and for system control. When equipped a remote microphone and emergency voice/alarm communications control, an authorized user can take command of the system either play selected pre-recorded messages or select specific tones, initiate live broadcast information either globally into the system, or to areas. Master Firefighter Phone equipped with a remote master phone, the authorized user connect to remote phone call-in requests and allow callers to be to each other. Although intended for use in assisting fire these system are also helpful during system setup and test. product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7165-2269:0542 for allowable and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest status. AC4100-1039 Rev. 3 11/2021 Annunciator Panels Bay Description Annunciators annunciators include a bay assembly, a power distribution interface module (PDI), a Transponder Interface Module, and an interconnect Communications with the host fire alarm control panel are via a Remote Unit Interface (RUI or RUI+) connection that allows for up to 2500 (762 m) distance. RUI can communicate with up to a total of 31 remote devices per master controller (on one or multiple RUI channels) and can be as a Class B or Class X communication pathway. Wiring can be either shielded