Home » Autocall Audible_Visible LED Notification Appliances, Wall Mount Multi-Candela Horn_LED Strobe, Model Series 59AV
File preview
Click the button below to download immediately for free
Show text preview
Datasheet LED Addressable Notification Appliances LED Notification Appliances, Wall Mount Multi-Candela Horn/LED Strobe, Series 59AV ULC Approved, FM addressed multi-candela TrueAlert ES LED A/V notification appliances Multi-candela LED strobe available in low (15, 30 and 75 cd) and high , 135 and 185 cd) range candela models Small compact design and low current draw due to energy efficient LEDs Advanced addressable notification controlled by IDNAC SLCs providing 29 VDC allow strobes to operate with lower current even battery backup Strobe intensity can be programmed from the control panel or the Wiring supervision to each appliance allows “T-tapped” connections for B circuits to simplify wiring (Class A circuits require in/out wiring) Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control panel TrueAlert Device Reports at the control panel detail appliance point ID, label, type, and candela setting Magnet test diagnostics assist checkout and testing of appliances and Compatibility with ADA requirements Strobe operation is listed to UL Standard 1971 and ULC Standard Horn operation is listed to UL Standard 464 and ULC Standard Synchronized LED strobe and piezo operation on the same IDNAC Indicator and Magnet Test Indicator LED indicates magnet test acknowledgment, 3 digit IDNAC and candela rating supervision Indicator LED can be configured to blink every polling cycle to indicate When the controller is in diagnostic mode, the magnet test pulses the LED to indicate appliance address and can be set to also flash the strobe LEDs and sound the horn design features Rugged, high impact, flame retardant thermoplastic housing in red and colors white with red letters Various covers and lettering options available Red with white letters Available with English FIRE lettering Covers can be easily removed without disturbing the connected and avoiding trouble conditions In/out wiring terminals for 18 AWG to 12 AWG Mounts to single gang US electrical boxes Optional mounting adapter plate to adapt to European electrical boxes 1: ES A59AV LED Addressable are Available in Red with White and White with Red Lettering notification appliance (horn) Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is “high” or “low” (~5 dBA difference) selectable at the appliance from the controller with FACP mode selected at the appliance ES 59 series LED A/Vs are individually addressed audible/visible notification that receive power, supervision, and control signals from a fire alarm control panel providing IDNAC Signaling Line Circuits SLC Controller Compatibility Reference). Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 4 03/2021 LED Notification Appliances, Wall Mount Multi-Candela Horn/LED Strobe, Model Series 59AV ES Operation Advantage circuit integrity ES A/V LED addressable appliances on IDNAC SLCs provide visible notification using a single two-wire circuit that also confirms connection to individual notification appliance electronic circuit. This provides supervision that extends beyond the appliance wiring connections. current usage on IDNAC SLCs constant 29 VDC source voltage is maintained, even during battery standby. This allows strobes to operate at higher voltage with lower current and a consistent current draw and voltage drop margin under both primary power and secondary battery standby.
Datasheet LED Addressable Notification Appliances LED Notification Appliances, Wall Mount Multi-Candela Horn/LED Strobe, Series 59AV ULC Approved, FM addressed multi-candela TrueAlert ES LED A/V notification appliances Multi-candela LED strobe available in low (15, 30 and 75 cd) and high , 135 and 185 cd) range candela models Small compact design and low current draw due to energy efficient LEDs Advanced addressable notification controlled by IDNAC SLCs providing 29 VDC allow strobes to operate with lower current even battery backup Strobe intensity can be programmed from the control panel or the Wiring supervision to each appliance allows “T-tapped” connections for B circuits to simplify wiring (Class A circuits require in/out wiring) Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control panel TrueAlert Device Reports at the control panel detail appliance point ID, label, type, and candela setting Magnet test diagnostics assist checkout and testing of appliances and Compatibility with ADA requirements Strobe operation is listed to UL Standard 1971 and ULC Standard Horn operation is listed to UL Standard 464 and ULC Standard Synchronized LED strobe and piezo operation on the same IDNAC Indicator and Magnet Test Indicator LED indicates magnet test acknowledgment, 3 digit IDNAC and candela rating supervision Indicator LED can be configured to blink every polling cycle to indicate When the controller is in diagnostic mode, the magnet test pulses the LED to indicate appliance address and can be set to also flash the strobe LEDs and sound the horn design features Rugged, high impact, flame retardant thermoplastic housing in red and colors white with red letters Various covers and lettering options available Red with white letters Available with English FIRE lettering Covers can be easily removed without disturbing the connected and avoiding trouble conditions In/out wiring terminals for 18 AWG to 12 AWG Mounts to single gang US electrical boxes Optional mounting adapter plate to adapt to European electrical boxes 1: ES A59AV LED Addressable are Available in Red with White and White with Red Lettering notification appliance (horn) Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is “high” or “low” (~5 dBA difference) selectable at the appliance from the controller with FACP mode selected at the appliance ES 59 series LED A/Vs are individually addressed audible/visible notification that receive power, supervision, and control signals from a fire alarm control panel providing IDNAC Signaling Line Circuits SLC Controller Compatibility Reference). Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 4 03/2021 LED Notification Appliances, Wall Mount Multi-Candela Horn/LED Strobe, Model Series 59AV ES Operation Advantage circuit integrity ES A/V LED addressable appliances on IDNAC SLCs provide visible notification using a single two-wire circuit that also confirms connection to individual notification appliance electronic circuit. This provides supervision that extends beyond the appliance wiring connections. current usage on IDNAC SLCs constant 29 VDC source voltage is maintained, even during battery standby. This allows strobes to operate at higher voltage with lower current and a consistent current draw and voltage drop margin under both primary power and secondary battery standby.