Home » Autocall Audible_Visible Notification Appliances, Indoor Ceiling Mount Multi-Candela Horn_Strobe, Model Series A49AV
File preview
Click the button below to download immediately for free
Show text preview
Datasheet ES Addressable Notification Appliances Notification Appliances, Indoor Ceiling Mount Multi-Candela Horn/ Series A49AV notification appliance (horn): Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is or (~5 dBA difference) selectable at the appliance from the controller with FACP mode selected at the appliance 1: ES Addressable A/V Application Reference selection of visible notification is dependent on occupancy, and local codes. ES Operation Advantage ES addressable appliances on IDNAC SLCs separate visible and audible notification using a single two- circuit that also confirms connection to the individual notification electronic circuit. This operation increases circuit supervision by providing supervision that extends beyond the appliance connections. current usage on IDNAC SLCs IDNAC SLCs, a constant 29 VDC source voltage is maintained, even battery standby, allowing strobes to operate at higher voltage lower current and ensuring a consistent current draw and voltage margin under both primary power and secondary battery standby. include wiring distances up to 2 to 3 times farther than with notification, or support for more appliances per IDNAC SLC, use of smaller gauge wiring, or combinations of these benefits, all installation and maintenance savings with high assurance that that operate during normal system testing will operate during case alarm conditions. Installation and Testing Time separate controls on the same two-wire SLC, installation time and for both retrofit and new construction can be significantly When Class B wiring is used, wiring can be tapped, allowing savings in distance, wire, conduit (size and utilization), and overall efficiency. Use of Self-Test and Magnet Test features improve efficiency. TrueAlert device reports conveniently identify about each connected appliance. ULC, CSFM Listed, FM Mount Addressable Visible (A/V) Notification Appliances individually addressed audible/visible notification appliances that power, supervision, and control signals from an Autocall fire control panel providing IDNAC Signaling Line Circuits (SLCs). LED Xenon tube strobes devices are interoperable on the same IDNAC (See TrueAlert ES A/V LEGACY Compatibility Reference .) addressed and controlled multi-candela TrueAlert ES (audible/visible) notification appliances provide: Multi-candela xenon strobe with synchronized 1 Hz flash rate and with programmable from the control panel or jumper selected 15, 30, 75 or 110cd on the AV model, or 110, 135 or 185 cd on the model Advanced addressable notification controlled by IDNAC SLCs. IDNAC SLCs provide regulated 29 VDC allowing horns to operate with current Wiring supervision to each appliance allowing connections Class B circuits to simplify wiring (Class A circuits require in/out Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control panel TrueAlert Device Reports at the control panel detailing appliance point custom label, type, and candela setting (see sample in TrueAlert Reports Reference) Magnet Test diagnostics to assist checkout and testing of appliances wiring Electrical test point access by removing the cover Compatibility with ADA requirements; (refer to important installation in Installation Reference) Compatibility with legacy TrueAlert addressable systems for upgrade replacement (see TrueAlert ES A/V LEGACY Compatibility ) Strobe operation is listed to UL Standard 1971 and ULC Standard Horn operation is listed to UL Standard 464 and ULC Standard Indicator and Magnet Test feature: Appliance LED can be selected to display each polling cycle to indicate supervision When the controller is in diagnostic mode, the Magnet Test pulses the to ind
Datasheet ES Addressable Notification Appliances Notification Appliances, Indoor Ceiling Mount Multi-Candela Horn/ Series A49AV notification appliance (horn): Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is or (~5 dBA difference) selectable at the appliance from the controller with FACP mode selected at the appliance 1: ES Addressable A/V Application Reference selection of visible notification is dependent on occupancy, and local codes. ES Operation Advantage ES addressable appliances on IDNAC SLCs separate visible and audible notification using a single two- circuit that also confirms connection to the individual notification electronic circuit. This operation increases circuit supervision by providing supervision that extends beyond the appliance connections. current usage on IDNAC SLCs IDNAC SLCs, a constant 29 VDC source voltage is maintained, even battery standby, allowing strobes to operate at higher voltage lower current and ensuring a consistent current draw and voltage margin under both primary power and secondary battery standby. include wiring distances up to 2 to 3 times farther than with notification, or support for more appliances per IDNAC SLC, use of smaller gauge wiring, or combinations of these benefits, all installation and maintenance savings with high assurance that that operate during normal system testing will operate during case alarm conditions. Installation and Testing Time separate controls on the same two-wire SLC, installation time and for both retrofit and new construction can be significantly When Class B wiring is used, wiring can be tapped, allowing savings in distance, wire, conduit (size and utilization), and overall efficiency. Use of Self-Test and Magnet Test features improve efficiency. TrueAlert device reports conveniently identify about each connected appliance. ULC, CSFM Listed, FM Mount Addressable Visible (A/V) Notification Appliances individually addressed audible/visible notification appliances that power, supervision, and control signals from an Autocall fire control panel providing IDNAC Signaling Line Circuits (SLCs). LED Xenon tube strobes devices are interoperable on the same IDNAC (See TrueAlert ES A/V LEGACY Compatibility Reference .) addressed and controlled multi-candela TrueAlert ES (audible/visible) notification appliances provide: Multi-candela xenon strobe with synchronized 1 Hz flash rate and with programmable from the control panel or jumper selected 15, 30, 75 or 110cd on the AV model, or 110, 135 or 185 cd on the model Advanced addressable notification controlled by IDNAC SLCs. IDNAC SLCs provide regulated 29 VDC allowing horns to operate with current Wiring supervision to each appliance allowing connections Class B circuits to simplify wiring (Class A circuits require in/out Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control panel TrueAlert Device Reports at the control panel detailing appliance point custom label, type, and candela setting (see sample in TrueAlert Reports Reference) Magnet Test diagnostics to assist checkout and testing of appliances wiring Electrical test point access by removing the cover Compatibility with ADA requirements; (refer to important installation in Installation Reference) Compatibility with legacy TrueAlert addressable systems for upgrade replacement (see TrueAlert ES A/V LEGACY Compatibility ) Strobe operation is listed to UL Standard 1971 and ULC Standard Horn operation is listed to UL Standard 464 and ULC Standard Indicator and Magnet Test feature: Appliance LED can be selected to display each polling cycle to indicate supervision When the controller is in diagnostic mode, the Magnet Test pulses the to ind