Autocall Cabinet Reference; Boxes, Doors, Dress Panels, Rack Mounting, and Accessories

4100ES Fire Control Panels Reference; Boxes, Doors, Dress Panels, Rack Mounting, and Accessories ULC, CSFM Listed* 4100ES Box and door options: Boxes are available sized for one, two, or three equipment bays, each a battery bay located at the bottom Colors include platinum or red Doors are glass front with modular dress panels, or solid Models are available with box and door combined for single package or packaged separately Enclosures are NEMA 1 rated; wall mount enclosures are also IP30 Refer to individual 4100ES data sheets for product application listings Enclosure Selection Chart) and dress panel selection is coordinated with cabinet Glass doors with modular dress panels provide visibility of and interface modules for Control Panels, Network Units (NDU), and Remote Annunciators Solid doors are for MINIPLEX Transponders and utility function where module visibility is not required Enclosure details: Latching dress panels easily lift off for internal access Smooth box surfaces are provided for locally cutting conduit entrance exactly where required Alignment markers are provided at the top and bottom of each box for 6 in. (152 mm) or 4 in. (102 mm) wall studs Knockout screw/nail holes are supplied for semi-flush mounting cabinet rack packaging reference: For use with Bud Industries Inc. special cabinet rack model number See Table 3 for cabinet rack listing 2: Two Bay Cabinets 3: Three Bay Cabinets 1: One Bay Cabinet 4: Rack Enclosure (shown with door open) This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7165-2269:0542 for allowable and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local Autocall product supplier for the latest status. Rev. 19 1/2020 Reference; Boxes, Doors, Dress Panels, Rack Mounting, and Accessories Selection Chart See Wall Mounted Enclosure Installation Reference and Cabinet Rack Specifications for dimensions. keys are shipped with system master controller. with Glass and Dress with Solid Door and Panel Door 1: Combined Box and Door Selection (select if box and door are to be shipped together) 1 Bay 2 Bay 3 Bay 1 Bay 2 Bay 3 Bay 2: Separate Box and Door Selection (select if boxes and doors are required to be shipped separately) 1 Bay Platinum 2 Bay 3 Bay 1 Bay 2 Bay 3 Bay from Bud Industries Inc. 3: Cabinet Rack Mounting Listings listed only as of document revision date; cabinets are listed with the 4100ES product line upright cabinet rack for 19 in. (483 mm) E.I.A.; gray includes front polycarbonate and rear louvered door, both with Autocall “B” keys Controller Rack Mount Kit, one per master controller Bay Rack Mounting Kit, one per expansion bay Distribution Module (PDM) Rack Mount Kit, order PDM separately per system voltage, one required cabinet rack Controller and Option Bays each require 9 Rack Units; 15.75 in. (400 mm) 4: Power Distribution Modules VAC VAC Distribution Module (PDM); select system voltage; one required per box or cabinet rack 5: Miscellaneous Accessories key, one is shipped with system Master Controller, order for replacement or when extra keys needed; (“B” key) and Address Label Kit, for module One kit is supplied for each cabinet; order if required for additional field module instal- 7 in.(37 mm) wide, four corners and trim for top, bottom, and sides semi-flush box trim