Home » Autocall ES Net Network Applications, Communications, Options and Specifications
File preview
Click the button below to download immediately for free
Show text preview
Datasheet ES Network Net Network Applications, Communications, Options and Specifications ULC, CSFM Listed, FM Approved* Net features Network (ES Net) is a high bandwidth (100 Mbps) IP based fire alarm that supports up to 99 nodes and uses industry standard technology and infrastructure for greater design and installation wide system upgrades from a single point Net allows for software updates to be applied to all network nodes a single download. The high bandwidth ES Net network can software updates to all 99 nodes from a single location at node on the network in minutes, increasing system up-time and business interruptions. appliance synchronization the Network Sync feature to synchronize all notification appliances a single loop of up to 99 nodes. Network Sync requires a network topology where all sync nodes be within a maximum distance of 30 nodes from the designated Sync Node (MSN) if using Ethernet or Fiber and 10 nodes if DSL. Refer to your control unit’s programmer manual for further diagnostics Net provides advanced network diagnostic tools and reports that easy to read. Detailed information about network communication and status is available, allowing technicians to pinpoint problems reduce the time required to troubleshoot network communication increased bandwidth and traffic speeds compared to fire networks Net is an IP based network which has greatly increased bandwidth to traditional fire networks. Every node that is part of a can be notified about network events. cable 1: Typical ES Net traffic speeds traffic rate megabits per second (Mbps), or better Mbps (single mode or multi- fiber media) Mbps to 12 Mbps depending on (with 18 AWG cabling) 2 Mbps in ULC mode 1: ES Net example Net overview Net fire alarm control units (FACUs) provide extensive installation, and service features with point and module capacities suitable a wide range of system applications and large multi-site installations. FACUs and devices 4100ES, 4010ES and 4007ES series FACUs 4100ES network display units (NDU) 4190 series TrueSite Workstations and Incident Commanders Net network configuration Net supports multiple Class X loops and/or Class B linear network See ES Net network multi-topology support. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0567, 7165-2269:0542, 7165-2269:0541 and 7165-2269:0536 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; your local Autocall product supplier for the latest status. AC4100-0076 Rev. 10 8/2021 Net Network Applications, Communications, Options and Specifications network diagnostic tool supports multiple remote terminal sessions ES control unit nodes and provides information on network status topology and attendance in the ES network. Historical port statistics as operational parameters and errors for each port are stored for Error reporting and historical data on some error conditions is available. network diagnostics tool diagnoses the following errors on the ES from an ES control unit or TSW: Link down Mis-wired links Ground fault Version control mismatch between nodes Extra node in network Duplicate node in network Missing node Non-sync nodes ES Net node requires an ES Net Network Interface Card (NIC) to and receive data on the network; in some cases optional network cards may be required. You can configure the network to share and control functions between nodes. ES NICs on each node connect in a point-to-point arrangement, security and fault-tolerance to the network. resilience Net is resilient to failures and can detect degraded and non- paths between any two connected nodes. network options Support for multiple Class X loops or multiple Class B linear network m) or less Ethernet communications with Cat-5e cable or better for runs of 328 ft
Datasheet ES Network Net Network Applications, Communications, Options and Specifications ULC, CSFM Listed, FM Approved* Net features Network (ES Net) is a high bandwidth (100 Mbps) IP based fire alarm that supports up to 99 nodes and uses industry standard technology and infrastructure for greater design and installation wide system upgrades from a single point Net allows for software updates to be applied to all network nodes a single download. The high bandwidth ES Net network can software updates to all 99 nodes from a single location at node on the network in minutes, increasing system up-time and business interruptions. appliance synchronization the Network Sync feature to synchronize all notification appliances a single loop of up to 99 nodes. Network Sync requires a network topology where all sync nodes be within a maximum distance of 30 nodes from the designated Sync Node (MSN) if using Ethernet or Fiber and 10 nodes if DSL. Refer to your control unit’s programmer manual for further diagnostics Net provides advanced network diagnostic tools and reports that easy to read. Detailed information about network communication and status is available, allowing technicians to pinpoint problems reduce the time required to troubleshoot network communication increased bandwidth and traffic speeds compared to fire networks Net is an IP based network which has greatly increased bandwidth to traditional fire networks. Every node that is part of a can be notified about network events. cable 1: Typical ES Net traffic speeds traffic rate megabits per second (Mbps), or better Mbps (single mode or multi- fiber media) Mbps to 12 Mbps depending on (with 18 AWG cabling) 2 Mbps in ULC mode 1: ES Net example Net overview Net fire alarm control units (FACUs) provide extensive installation, and service features with point and module capacities suitable a wide range of system applications and large multi-site installations. FACUs and devices 4100ES, 4010ES and 4007ES series FACUs 4100ES network display units (NDU) 4190 series TrueSite Workstations and Incident Commanders Net network configuration Net supports multiple Class X loops and/or Class B linear network See ES Net network multi-topology support. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0567, 7165-2269:0542, 7165-2269:0541 and 7165-2269:0536 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; your local Autocall product supplier for the latest status. AC4100-0076 Rev. 10 8/2021 Net Network Applications, Communications, Options and Specifications network diagnostic tool supports multiple remote terminal sessions ES control unit nodes and provides information on network status topology and attendance in the ES network. Historical port statistics as operational parameters and errors for each port are stored for Error reporting and historical data on some error conditions is available. network diagnostics tool diagnoses the following errors on the ES from an ES control unit or TSW: Link down Mis-wired links Ground fault Version control mismatch between nodes Extra node in network Duplicate node in network Missing node Non-sync nodes ES Net node requires an ES Net Network Interface Card (NIC) to and receive data on the network; in some cases optional network cards may be required. You can configure the network to share and control functions between nodes. ES NICs on each node connect in a point-to-point arrangement, security and fault-tolerance to the network. resilience Net is resilient to failures and can detect degraded and non- paths between any two connected nodes. network options Support for multiple Class X loops or multiple Class B linear network m) or less Ethernet communications with Cat-5e cable or better for runs of 328 ft