Free fire alarm PDF manuals, documents, installation instructions, and technical specifications.

Autocall Fireray One Beam Detector

Home » Autocall Fireray One Beam Detector
File preview

File preview

Click the button below to download immediately for free

Download “Autocall Fireray One Beam Detector” Autocall_Fireray_One_Beam_Detector.pdf – Downloaded 0 times – 873 KB


UL, ULC Listed, CSFM Approved* no specialist tools or knowledge needed for installation and the Fireray One is a standalone beam detector that prioritises of installation. the Fireray One, it could not be easier to bring the benefits of detection to your application. One Minute Auto-Alignment Just steer the laser onto the reflector, at the flick of a switch, it aligns itself; eight times faster than detectors. One person installation Everything can be done by one person. One standalone product No specialist tools required; minimal prior and training needed. warehouses buildings Products One Beam Detector 1: Fireray One features One installation effective protection A standalone beam with all the of Fireray beam detection point of wiring and Movement automatically for natural movement to maintain when according to guidelines of the building cause other beam to misalign and in nuisance alarms 1: Fireray One 2: Fireray One 3: Reflector Listings are by Fire Fighting Enterprises. Refer to CSFM 7260-1508:0500. This product was not approved by FM as of document revision date. Rev. 1 06/2021 One Beam Detector specification range method protocol Movement Tracking 2: Detection performance ft to 164 ft (0 m to 50 m) ft to 394 ft (0 m to 120 m) with Reflective Long Range Kit assisted, Auto-Alignment manual alignment optional setting check, box search, adjust, and center for natural shifts in alignment from building movement when mounted according to guidelines for gradual build-up of contamination on the optical surfaces for high levels of sunlight and artificial lighting compensation Cancellation Technology wavelength, smoke detection 850 nm near infrared (invisible) nm visible; Class IIIa <5 mW laser, laser alignment beam detectors to be mounted facing each other with the reflectors in the middle. Eliminates false Beam Phasing caused by crosstalk between beams. alarm and fault relays (VFCO) 2 A at 30 VDC output response threshold levels to Alarm to Fault user interface status indication status indication distance between and Reflector path clearance spacing between detectors location dimensions x H x D) dimensions weight arrangement color 3: Programmable user settings (1.25 dB) Fastest response to smoke (1.87 dB) Default value (3.46 dB) High immunity to false alarms, slow response to smoke (8.23 dB) Highest immunity to false alarms, slowest response to smoke through the integrated user interface seconds, for momentary partial obstruction of the beam path seconds, for momentary obstruction of the beam path 4: User features mode switch, alignment directional buttons, and configuration switches for alarm response threshold green LEDs and one yellow LED operation: green LED flashing every 10 seconds condition: red LED flashing every 5 seconds condition: yellow LED flashing every 10 seconds for obscuration or every 5 seconds for contamination front face with enclosed optics. Cleaning the optics does not affect alignment. 5: Design parameters ft to 164 ft (5 m to 50 m) ft to 394 ft (50 m to 120 m) with Reflective Long Range Kit ft (1 m) in diameter from center line between detector and reflector ft (18.3 m) maximum as per NFPA 72 the ceiling jet flow (top 10% of the floor to ceiling height) unless otherwise stipulated in. x 7.13 in. x 5.28 in. (130 mm x 181 mm x 134 mm), see Figure 2 to 164.0 ft (50 m) separation distance 3.94 in. x 3.94 in. x 0.36 in (100 mm x 100 mm x 9 mm) to 393.6 ft (120 m) separation distance - Four reflectors 7.88 in x 7.88 in. x 0.36 in. (200 mm x 200 mm x 9 in square pattern 1.55 lbs (0.7 kg) [/bg_collapse]