Autocall IAMs (Mini, Dual, Signal, and Relay); Monitor ZAMs, and Line Isolator Modules

UL, ULC, CSFM Listed* Technology Addressable Devices (Mini, Dual, Signal, and Relay); Monitor ZAMs, and Line Isolator Modules Technology addressable input/output module features Mini-IAMs (Individual Addressable Module) provide remote of a single input and have a small size suitable for mounting Dual Input IAMs provide remote monitoring of two Class B inputs or Class A input Relay IAMs provide remote relay contact control Signal IAMs combine with 24 VDC to provide a 2 A local Class B or A operation Notification Appliance Circuit (NAC) Monitor ZAMs (Zone Adapter Module) provide local Initiating Device (IDC) operation, either dual Class B IDCs or single Class A IDC Line Isolator Modules monitor line condition and separates input output to isolate short circuits Address is easily programmed with the MX Service Tool Modules (except A4090-5201 Mini-IAM) are mounted in a cover that provides access to the address setting port and allows of the LED status indicator Modules with covers mount in a standard dual gang MK box UL listed to Standard 864 For use with Autocall 4100ES, 4010ES, and 4100U Series fire alarm panels equipped with an MX Loop Module Refer to data sheet AC4100-0059 MX Loop Interface Modules for and 4010ES Fire Alarm Control Panels for MX Loop Module MX Technology addressable I/O (input/output) modules provide monitoring and control to satisfy a variety of applications. Each individually addressable and communicates with an MX Loop Module in the host fire alarm control panel. 1: Typical MX Technology I/O Module Assemblies 1: Mini-IAM Mini-IAM (Individual Addressable Module) Features: Small size for single input circuit monitoring of normally open or closed contacts Provides open and short circuit monitoring of the line Fits in small devices such as flow switches, special detection devices, explosion proof callpoints A variation of this module is used in addressable callpoints and pull Dimensions are 1 W x 2 5 H x D (48 mm x 58 mm x 13 mm) If mounted separately from the device being monitored, select box with cover plate per dimensions above 2: Dual Input IAM Dual Input IAM Features: Two separately wired Class B spur inputs providing open and short line monitoring that can be combined for one Class A input Each can be configured to monitor normally open or normally closed Both inputs can be configured to initiate an alarm or short circuit fault in the event of a short circuit on normally open monitoring This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0506, 7300-22690551 and 7165-2269:0542 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 3 1/2020 (Mini, Dual, Signal, and Relay); Monitor ZAMs, and Line Isolator Modules Monitor ZAM (Zone Adapter Module) Features: Provides monitoring and zone power for two Class B circuits or one A circuit of low voltage conventional detectors and callpoints External 24 VDC power is supplied from a A100-5130 Voltage Module in the controlling host fire alarm panel 24 VDC status is monitored and a fault signal is provided if lost Power reset is controlled from the MX Loop module in the host fire panel Input detection circuit can be wired as one or two spur circuits (Class or one 4-wire detection circuit 3: Relay IAM Relay IAM Features: A single relay output programmable from the MX Loop Applications include signaling fire conditions to plant, machinery, fire dampers, and security systems Relay coil is monitored Relay contact is rated for 2A @ 24V DC 4: Signal IAM Signal IAM Features: Remote addressable NAC spur can be wired Class B or Class A and is 2A @ 24V DC for up to 62 appliances; requires a sepa