Home » Autocall IDNet Communicating Devices Addressable Manual Stations
File preview
Click the button below to download immediately for free
Show text preview
Datasheet Peripherals Communicating Devices Addressable Manual Stations Action Stations (Breakglass) require the operator to strike front mounted hammer to break the glass and expose the recessed lever. The pull lever then operates as a single action station. action NO Single action NO Retrofit kit Breakglass Push A2099-9828 Cover kit Action Stations (Push Type) require that a spring loaded plate, marked PUSH, be pushed back to access the pull of the single action station. reset requires the use of a key to reset the manual station lever deactivate the alarm switch. If you use the break-rod, you must it. testing is performed by physical activation of the pull lever. You also perform electrical testing by unlocking the station housing to the alarm switch. ULC, CSFM Listed, FM addressable manual fire alarm stations with: Power and data supplied by IDNet addressable communications using single wire pair Operation that complies with ADA requirements Visible LED indicator that flashes during communications and is on when the station has been activated The NO GRIP Single Action Station and Retrofit Kit are available with more easily operated pull lever for applications where anticipated may find the standard station lever difficult to activate Pull lever that protrudes when alarmed Break-rod supplied (use is optional) Models are available with single or double action (breakglass or push) UL listed to Standard 38 NEMA 1 rated. See Addressable manual station product selection for information. with the following Autocall control panels: Model Series 4007ES, 4010ES, 4100ES fire alarm control panels with IDNet communications construction: Electronics module enclosure minimizes dust infiltration Allows mounting in standard electrical boxes Screw terminals for wiring connections resistant reset key lock, keyed same as Autocall fire cabinets. mounting options: Surface or semi-flush with standard boxes or matching Autocall boxes Flush mount adapter kit Adapters are available for retrofitting to commonly available existing Autocall addressable manual station combines the familiar Autocall station housing with a compact communication module is easily installed to satisfy demanding applications. Its integral addressable module (IAM) constantly monitors status and changes to the connected control panel through IDNet wiring. of the A4099-9004 single action manual station requires a downward pull to activate the alarm switch. Completing the action an internal plastic break-rod which is visible below the pull lever, is optional. The use of a break-rod can be a deterrent to vandalism interfering with the minimum pull requirements needed for easy The pull lever latches into the alarm position and remains out of the housing to provide a visible indication. Action NO GRIP Station A4099-9021. For applications such as Building Code, Title 24, which requires “Controls and operating shall be operable with one hand and shall not require grasping, pinching or twisting of the wrist” the model A4099-9021 provides a more easily operated pull lever compared to standard Retrofit of existing stations is available using the A4099-9805 kit. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7150-2269:0515 for allowable and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 5 03/2021 Communicating Devices Addressable Manual Stations to 4099 MAPNET II/ IDNet Addressable Manual Pull Station with LED Installation Instructions 579-1135AC for additional information. and communications means connections listed temperature range range color lever color dimensions 1: Specifications communications, 1 address for each station switch, 8 position terminal for in/out wiring, for 18 AWG to
Datasheet Peripherals Communicating Devices Addressable Manual Stations Action Stations (Breakglass) require the operator to strike front mounted hammer to break the glass and expose the recessed lever. The pull lever then operates as a single action station. action NO Single action NO Retrofit kit Breakglass Push A2099-9828 Cover kit Action Stations (Push Type) require that a spring loaded plate, marked PUSH, be pushed back to access the pull of the single action station. reset requires the use of a key to reset the manual station lever deactivate the alarm switch. If you use the break-rod, you must it. testing is performed by physical activation of the pull lever. You also perform electrical testing by unlocking the station housing to the alarm switch. ULC, CSFM Listed, FM addressable manual fire alarm stations with: Power and data supplied by IDNet addressable communications using single wire pair Operation that complies with ADA requirements Visible LED indicator that flashes during communications and is on when the station has been activated The NO GRIP Single Action Station and Retrofit Kit are available with more easily operated pull lever for applications where anticipated may find the standard station lever difficult to activate Pull lever that protrudes when alarmed Break-rod supplied (use is optional) Models are available with single or double action (breakglass or push) UL listed to Standard 38 NEMA 1 rated. See Addressable manual station product selection for information. with the following Autocall control panels: Model Series 4007ES, 4010ES, 4100ES fire alarm control panels with IDNet communications construction: Electronics module enclosure minimizes dust infiltration Allows mounting in standard electrical boxes Screw terminals for wiring connections resistant reset key lock, keyed same as Autocall fire cabinets. mounting options: Surface or semi-flush with standard boxes or matching Autocall boxes Flush mount adapter kit Adapters are available for retrofitting to commonly available existing Autocall addressable manual station combines the familiar Autocall station housing with a compact communication module is easily installed to satisfy demanding applications. Its integral addressable module (IAM) constantly monitors status and changes to the connected control panel through IDNet wiring. of the A4099-9004 single action manual station requires a downward pull to activate the alarm switch. Completing the action an internal plastic break-rod which is visible below the pull lever, is optional. The use of a break-rod can be a deterrent to vandalism interfering with the minimum pull requirements needed for easy The pull lever latches into the alarm position and remains out of the housing to provide a visible indication. Action NO GRIP Station A4099-9021. For applications such as Building Code, Title 24, which requires “Controls and operating shall be operable with one hand and shall not require grasping, pinching or twisting of the wrist” the model A4099-9021 provides a more easily operated pull lever compared to standard Retrofit of existing stations is available using the A4099-9805 kit. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7150-2269:0515 for allowable and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 5 03/2021 Communicating Devices Addressable Manual Stations to 4099 MAPNET II/ IDNet Addressable Manual Pull Station with LED Installation Instructions 579-1135AC for additional information. and communications means connections listed temperature range range color lever color dimensions 1: Specifications communications, 1 address for each station switch, 8 position terminal for in/out wiring, for 18 AWG to