Autocall IDNet Communicating Devices; Addressable Manual Stations for Releasing Applications

Datasheet System Peripherals Communicating Devices; Addressable Manual Stations for Releasing Applications ULC, CSFM Listed, FM addressable manual fire alarm stations for releasing with: Power and data supplied via IDNet addressable communications using single wire pair Operation that complies with ADA requirements Visible LED indicator that flashes during communications and is on when the station has been activated Pull lever that protrudes when alarmed Break-rod supplied (use is optional) Dual action push and pull operation Label kit provides for six varieties of releasing applications (ordered with the following Autocall Releasing System control equipped with IDNet communications: Model Series 4100ES, 4010ES, 4007ES construction: Electronics module enclosure minimizes dust infiltration Allows mounting in standard electrical boxes Screw terminals for wiring connections resistant reset key lock Locks are keyed the same as Autocall fire alarm cabinets mounting options: Surface or semi-flush with standard boxes or matching Autocall boxes Flush mount adapter kit Adapters are available for retrofitting to commonly available existing listed to Standard 38 A4099 series addressable manual stations combine the familiar housing with a compact communication module providing easy for releasing applications. The integral individual addressable (IAM) monitors status and communicates changes to the control panel via IDNet communications wiring. blank area on the front of the station allows the selection of a label to the specific releasing application (label kit is ordered separately). to data sheet AC4099-0005 for standard Autocall addressable stations.) 1: Addressable Station for Releasing Applications requires that a spring loaded interference plate (marked be pushed back to access the station pull lever with a firm pull that activates the alarm switch. Completing the action an internal plastic break-rod (visible below the pull lever, use optional). The use of a break-rod can be a deterrent to vandalism interfering with the minimum pull requirements needed for easy The pull lever latches into the alarm position and remains out of the housing to provide a visible indication. reset requires the use of a key to reset the manual station lever deactivate the alarm switch. (If the break-rod is used, it must be testing is performed by physical activation of the pull lever. testing can be also performed by unlocking the station housing activate the alarm switch. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7150-2269:0515 for allowable and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest status. Rev. 3 03/2021 Communicating Devices; Addressable Manual Stations for Releasing Applications Manual Station Product Selection 1: Addressable Manual Stations action, Push operation, Addressable manual station; red housing with white letters and white pull lever; requires label kit kit, white lettering on red background; select the label required for the specific releasing application; types include: Clean Extinguishing, Carbon Dioxide, Foam System, Sprinkler, and Manual 2: Accessories mount steel box, red aluminum surface mount box, red trim plate for double gang switch box, red trim plate for Wiremold box V5744-2, red mount adapter kit, black mount adapter kit, beige break-rod to Figure 2 for dimensions for retrofit, refer to Figure 4. to Figure 5 for more information. and Communications Means Connections Listed Temperature Range Range Color Lever Color Dimensions Instructions 3: Specifications communications, 1 address per station, up to 2500 ft (762 m) from fir