Home » Autocall InfoAlarm Command Center for the 4100ES Fire Alarm Control Panel
File preview
Click the button below to download immediately for free
Show text preview
UL, ULC listed, FM Approved* with Autocall ES Net Fire Alarm Networks expanded content display interface for Autocall 4100ES fire alarm control panels, available with the following Fire alarm control panels (stand-alone or networked) including CPU options (Software Revision 12 or higher is required) Network Display Units (NDU) with support for up to 12,000 points Remote Annunciator panels and models that mount in a dedicated (4100ES control panels support Remote InfoAlarm Command independent of host panel display type) UL listed to Standard 864 Command Centers provide customized operating “Activity in System” primary display choices include: First and Most First 5 and Most Recent, First 8, Site Plan with activity status General Alarm, or Direct to List; selectable individually by event System reports are easily viewed; logs can be read with minimal required Up to six “softkeys” per screen provide functions that vary with the screen information aiding operators to determine how to Up to two languages are available per system, easily selected by key press (systems with IMS/GCC/NPU or 2 x 40 LCD or annunciators require one language to be the default font) International models allow customized language legends for operator and status LEDs by point Information sent to Remote InfoAlarm Command Centers can be properties: 320 x 240 dot matrix (QVGA) display provides an active area of 4.53 in. x 3.4 in. H (115 mm x 86 mm) displaying up to 854 characters using ASCII character font Bright white LED backlighting provides efficient and long lasting operation is selectable as continuous or off with power fail with no key presses Command Center Control Panel LCD interface requires key presses to access detailed information. By using a larger format instead of an individual text line display, the LCD provides information for Alarm, Supervisory, or Trouble. The format can customized per application allowing additional information to be to suit the specific application. Fire Control Panels Command Center for the 4100ES Fire Alarm Control Panel 1: Command for Control Panel Mounting 2: Command Center in Remote Cabinet Command Centers for 4100ES fire alarm systems provide large display with extended information content, dual language including 2 byte character languages, and an intuitive control interface per the following: Up to 10 InfoAlarm Command Centers are supported per 4100ES panel; able to allow one InfoAlarm Command Center to take- and to designate access levels for interfaces not in-control; can be programmed for in-control status indications Menu-driven format conveniently prompts operators for the next required Key controls are provided to select the highlighted entry, load next of information, or jump to top or bottom of activity lists Direct point callup displays individual points alphabetically and then in on the logical choice as more point information is entered A Site Plan bitmap can be displayed for reference; icons can be added indicate system status Up to 50 custom point detail messages can be generated Date formats are either MM/DD/YY or DD/MM/YY Time formats are either 24 hour or 12 hour with AM/PM System Normal screen supports a gray scale bitmap (watermark) for name, company logo, or site plan Additional listings may be applicable; contact your local product supplier for the latest status. For specific product listings please refer to the tables on pages 8 and 9. Rev. 8 03/2021 Command Center for the 4100ES Fire Alarm Control Panel Plan with Event Icons Plan Bitmap. The InfoAlarm Command Center supports a site plan bitmap image (size is 281 pixels wide by 192 pixels high) can also display icons indicating activity and location. Shown to the is a sample site plan with icons shown in each building area. For this each area is showing an “A” for an initiating device in alarm, a for waterflow occurring, and an icon indicating notification appliances alarm. (Icons can be created for site specific symbology, these are for only.) P
UL, ULC listed, FM Approved* with Autocall ES Net Fire Alarm Networks expanded content display interface for Autocall 4100ES fire alarm control panels, available with the following Fire alarm control panels (stand-alone or networked) including CPU options (Software Revision 12 or higher is required) Network Display Units (NDU) with support for up to 12,000 points Remote Annunciator panels and models that mount in a dedicated (4100ES control panels support Remote InfoAlarm Command independent of host panel display type) UL listed to Standard 864 Command Centers provide customized operating “Activity in System” primary display choices include: First and Most First 5 and Most Recent, First 8, Site Plan with activity status General Alarm, or Direct to List; selectable individually by event System reports are easily viewed; logs can be read with minimal required Up to six “softkeys” per screen provide functions that vary with the screen information aiding operators to determine how to Up to two languages are available per system, easily selected by key press (systems with IMS/GCC/NPU or 2 x 40 LCD or annunciators require one language to be the default font) International models allow customized language legends for operator and status LEDs by point Information sent to Remote InfoAlarm Command Centers can be properties: 320 x 240 dot matrix (QVGA) display provides an active area of 4.53 in. x 3.4 in. H (115 mm x 86 mm) displaying up to 854 characters using ASCII character font Bright white LED backlighting provides efficient and long lasting operation is selectable as continuous or off with power fail with no key presses Command Center Control Panel LCD interface requires key presses to access detailed information. By using a larger format instead of an individual text line display, the LCD provides information for Alarm, Supervisory, or Trouble. The format can customized per application allowing additional information to be to suit the specific application. Fire Control Panels Command Center for the 4100ES Fire Alarm Control Panel 1: Command for Control Panel Mounting 2: Command Center in Remote Cabinet Command Centers for 4100ES fire alarm systems provide large display with extended information content, dual language including 2 byte character languages, and an intuitive control interface per the following: Up to 10 InfoAlarm Command Centers are supported per 4100ES panel; able to allow one InfoAlarm Command Center to take- and to designate access levels for interfaces not in-control; can be programmed for in-control status indications Menu-driven format conveniently prompts operators for the next required Key controls are provided to select the highlighted entry, load next of information, or jump to top or bottom of activity lists Direct point callup displays individual points alphabetically and then in on the logical choice as more point information is entered A Site Plan bitmap can be displayed for reference; icons can be added indicate system status Up to 50 custom point detail messages can be generated Date formats are either MM/DD/YY or DD/MM/YY Time formats are either 24 hour or 12 hour with AM/PM System Normal screen supports a gray scale bitmap (watermark) for name, company logo, or site plan Additional listings may be applicable; contact your local product supplier for the latest status. For specific product listings please refer to the tables on pages 8 and 9. Rev. 8 03/2021 Command Center for the 4100ES Fire Alarm Control Panel Plan with Event Icons Plan Bitmap. The InfoAlarm Command Center supports a site plan bitmap image (size is 281 pixels wide by 192 pixels high) can also display icons indicating activity and location. Shown to the is a sample site plan with icons shown in each building area. For this each area is showing an “A” for an initiating device in alarm, a for waterflow occurring, and an icon indicating notification appliances alarm. (Icons can be created for site specific symbology, these are for only.) P