Home » Autocall LED Text Messaging Appliance with Addressable Message Selection using IDNet Communications

File preview
Click the button below to download immediately for free
Show text preview
UL, ULC, CSFM Listed ES Fire Control Units Text Messaging Appliance with Addressable Message Selection using IDNet 1: TrueAlert Text Messaging Appliance with sample evacuation message plan on page 4 visibility, multi-color LED text message board provides visible textual alarm notification controlled from compatible Johnson fire alarm control units: During alarm conditions, up to 32 pre-programmed message selections can be activated in response to pre-defined emergency situations or linked specific system point status conditions Text messages provide textual alarm notification for areas of high noise or with other audibility limitations Text messages can duplicate a broadcasted audible message or can provide more local detail per the Emergency Communication Systems/Mass UL listed to Standard 1638, Textual Visible Appliance; ULC listed to S527, Miscellaneous Ancillary Device. Refer to ULC note in message specifications with the 4007ES, 4010, 4010ES, 4100ES, and 4100U Series fire alarm control unit using IDNet communications IDNet communications format emulates 4009 IDNet NAC Extender (4009A) controls for easy interfacing 4007ES, 4010ES, 4100ES, and 4100U IDNet SLCs (signaling line circuit) can control up to 25 message boards with up to ten 4009 IDNet NAC 4010 IDNet SLCs control up to five total of either type message presentation area provides long distance, wide area (140 viewing: Dual line, 2.3 in. (58 mm) high messages provide typical viewing distance of up to 100 ft (30.5 m) Single line, 4.7 in. (119 mm) high messages provide typical viewing distance of up to 200 ft (61 m) LEDs are multi-color, red/yellow/green, to emphasize message content Words can be upper or lower case, standard, bolded, condensed or expanded, with selectable sizes Messages can be static, flashing, or scrolling with a variety of appearance/transition options communications control provides: Up to 32 available messages; 10 factory pre programmed messages are included message details: Advise of proper evacuation routes, relocate to a secure area, take action due to severe weather conditions, defend in place, or other facility specific New messages can be created; factory pre programmed messages can be modified if needed Please note that the creation and modification of alarm messages may trigger code-mandated retesting of the fire alarm system and should be by authorized service personnel; non-alarm general messages can be created using TrueSite Workstation Free-Form Messaging Software requirements: Message board is powered by listed fire alarm power supply providing 24 VDC with battery backup, typically provided by host control unit features: Standard message board includes fixed brackets for wall mounting and also includes 100 mm VESA (Video Electronics Standards Association) holes for use with listed wall or ceiling VESA mounting bracket Optional wall mount adjustable brackets allow rotation downward where required for improved viewing Optional mounting box secures to wall, surface or flush; can also mount with 100 mm VESA bracket Ceiling mounting is available by cable suspension connected to top mounted eyehooks (optional) operation mode: Message boards can also display general non-alarm information via local LAN Ethernet connection created using TrueSite Workstation Free-Form software; general free-form messaging is overridden during an Alarm or Alert condition Control units will override non-alarm messages upon alarm; they can also be programmed to blank the display during local power failure to conserve product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:324 for allowable and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Additional listings may be applicable, contact your local Controls product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Johnson Controls International. Rev. 1 6/2021 Text Messaging Appliance with Addressable Message Selection using IDNet Communications messaging appliances. Audible appliances and strobes are commonly used to provide notification of alarm conditions, typically to
UL, ULC, CSFM Listed ES Fire Control Units Text Messaging Appliance with Addressable Message Selection using IDNet 1: TrueAlert Text Messaging Appliance with sample evacuation message plan on page 4 visibility, multi-color LED text message board provides visible textual alarm notification controlled from compatible Johnson fire alarm control units: During alarm conditions, up to 32 pre-programmed message selections can be activated in response to pre-defined emergency situations or linked specific system point status conditions Text messages provide textual alarm notification for areas of high noise or with other audibility limitations Text messages can duplicate a broadcasted audible message or can provide more local detail per the Emergency Communication Systems/Mass UL listed to Standard 1638, Textual Visible Appliance; ULC listed to S527, Miscellaneous Ancillary Device. Refer to ULC note in message specifications with the 4007ES, 4010, 4010ES, 4100ES, and 4100U Series fire alarm control unit using IDNet communications IDNet communications format emulates 4009 IDNet NAC Extender (4009A) controls for easy interfacing 4007ES, 4010ES, 4100ES, and 4100U IDNet SLCs (signaling line circuit) can control up to 25 message boards with up to ten 4009 IDNet NAC 4010 IDNet SLCs control up to five total of either type message presentation area provides long distance, wide area (140 viewing: Dual line, 2.3 in. (58 mm) high messages provide typical viewing distance of up to 100 ft (30.5 m) Single line, 4.7 in. (119 mm) high messages provide typical viewing distance of up to 200 ft (61 m) LEDs are multi-color, red/yellow/green, to emphasize message content Words can be upper or lower case, standard, bolded, condensed or expanded, with selectable sizes Messages can be static, flashing, or scrolling with a variety of appearance/transition options communications control provides: Up to 32 available messages; 10 factory pre programmed messages are included message details: Advise of proper evacuation routes, relocate to a secure area, take action due to severe weather conditions, defend in place, or other facility specific New messages can be created; factory pre programmed messages can be modified if needed Please note that the creation and modification of alarm messages may trigger code-mandated retesting of the fire alarm system and should be by authorized service personnel; non-alarm general messages can be created using TrueSite Workstation Free-Form Messaging Software requirements: Message board is powered by listed fire alarm power supply providing 24 VDC with battery backup, typically provided by host control unit features: Standard message board includes fixed brackets for wall mounting and also includes 100 mm VESA (Video Electronics Standards Association) holes for use with listed wall or ceiling VESA mounting bracket Optional wall mount adjustable brackets allow rotation downward where required for improved viewing Optional mounting box secures to wall, surface or flush; can also mount with 100 mm VESA bracket Ceiling mounting is available by cable suspension connected to top mounted eyehooks (optional) operation mode: Message boards can also display general non-alarm information via local LAN Ethernet connection created using TrueSite Workstation Free-Form software; general free-form messaging is overridden during an Alarm or Alert condition Control units will override non-alarm messages upon alarm; they can also be programmed to blank the display during local power failure to conserve product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listing 7300-0026:324 for allowable and/or conditions concerning material presented in this document. It is subject to re-examination, revision, and possible cancellation. Additional listings may be applicable, contact your local Controls product supplier for the latest status. Listings and approvals under Simplex Time Recorder Co. are the property of Johnson Controls International. Rev. 1 6/2021 Text Messaging Appliance with Addressable Message Selection using IDNet Communications messaging appliances. Audible appliances and strobes are commonly used to provide notification of alarm conditions, typically to