Home » Autocall MX Loop Interface Modules for 4100ES and 4010ES Fire Alarm Control Panels; International
File preview
Click the button below to download immediately for free
Show text preview
UL, ULC, CSFM Listed* Control Panel Modules Loop Interface Modules for 4100ES and 4010ES Fire Alarm Control Panels MX Technology addressable devices to a Autocall 4100ES 4010ES fire alarm control panel: Connect up to 250 MX addressable devices, with up to 500 mA of current per MX Loop module Up to 30 MX Loop Interface Modules per 4100ES fire alarm control Up to 4 MX Loop Interface Modules per 4010ES fire alarm control Provides dual isolated Class B loops that can be connected together Class A operation Device LEDs for alarm activation are selectable per loop as 5, 10, 20 or to be activated simultaneously; LED blink on poll is also selectable loop On-board LED diagnostics indicated module status for installation and convenience Compatible with 4100ES and 4010ES panels with software revision or higher and MX loop module software 2.01 or higher Supports Local Mode operation when module is mounted in MINIPLEX UL listed to Standard 864 Loop Communications provide: Compatibility with many types of existing cable for convenient retrofit typical communications distances up to 2 km (6560 ft) Wiring lengths may be longer depending on wiring characteristics and conditions, consult your Autocall product representative for details advanced MX Loop Module provides the following features: Information communicated to the control panel is analyzed using the Fastlogic algorithm The MX Fastlogic algorithm is considered an Expert algorithm that uses fire data as a basis for the alarm decision WALKTEST system testing with automatic self-resetting is available for mode (select SIG OFF) Peripherals provide: Soft addressing of devices performed using the 850EMT programming Device addresses may be changed at the front panel addressable devices include: Smoke sensors, heat sensors, and combination smoke/heat sensors Sensor base operation is available with loop powered sounder or or with separately powered sounder Loop powered beacons and sounder-beacons Single, dual, and multiple I/O modules Relay, signal, monitor, and separate line-powered isolator modules Indoor and outdoor breakglass callpoints Single and dual action manual stations Voltage Regulator Module A100-5130 or A010-9917 provides regulated DC voltage for use with Monitor ZAMs 1: Loop Interface Module Basic Reference Compatibility applications requiring compatible Autocall fire alarm control features to be applied to UL listed versions of MX Technology the MX Loop Interface Module provides the necessary monitoring, and control for up to 250 addressable MX per loop. Multiple MX Loop Interface Modules can be installed increased capacity. LEDs provide service level module status indications for earth monitoring, device response, and loop power Technology Features Fastlogic operation for photoelectric sensors and photoelectric/heat sensors. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0506, 7165-2269:0542 and 7165-2269:0541 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local supplier for the latest status. Rev. 10 2/2021 Loop Interface Modules for 4100ES and 4010ES Fire Alarm Control Panels Fastlogic Sensor Operation Fastlogic sensor operation is an algorithm that takes into account the pattern of smoke build up over time and applies fuzzy logic to calculate the of risk. This algorithm uses over 200 years of fire test data from research at the University of Duisburg (Duisburg, Germany) to determine the that there is a real fire and is designed to achieve faster detection of real fires and slower (preferably no detection) of false alarm sources. Fastlogic Sensor Basics MX Fastlogic algorithm can be described as an Expert algorithm since it uses real fire data as a basis for the alarm decision. For any given we are obliged to employ the most suitable detection in terms of response to an actual fire while minimizing false alarms. This general is clearly reflected in l
UL, ULC, CSFM Listed* Control Panel Modules Loop Interface Modules for 4100ES and 4010ES Fire Alarm Control Panels MX Technology addressable devices to a Autocall 4100ES 4010ES fire alarm control panel: Connect up to 250 MX addressable devices, with up to 500 mA of current per MX Loop module Up to 30 MX Loop Interface Modules per 4100ES fire alarm control Up to 4 MX Loop Interface Modules per 4010ES fire alarm control Provides dual isolated Class B loops that can be connected together Class A operation Device LEDs for alarm activation are selectable per loop as 5, 10, 20 or to be activated simultaneously; LED blink on poll is also selectable loop On-board LED diagnostics indicated module status for installation and convenience Compatible with 4100ES and 4010ES panels with software revision or higher and MX loop module software 2.01 or higher Supports Local Mode operation when module is mounted in MINIPLEX UL listed to Standard 864 Loop Communications provide: Compatibility with many types of existing cable for convenient retrofit typical communications distances up to 2 km (6560 ft) Wiring lengths may be longer depending on wiring characteristics and conditions, consult your Autocall product representative for details advanced MX Loop Module provides the following features: Information communicated to the control panel is analyzed using the Fastlogic algorithm The MX Fastlogic algorithm is considered an Expert algorithm that uses fire data as a basis for the alarm decision WALKTEST system testing with automatic self-resetting is available for mode (select SIG OFF) Peripherals provide: Soft addressing of devices performed using the 850EMT programming Device addresses may be changed at the front panel addressable devices include: Smoke sensors, heat sensors, and combination smoke/heat sensors Sensor base operation is available with loop powered sounder or or with separately powered sounder Loop powered beacons and sounder-beacons Single, dual, and multiple I/O modules Relay, signal, monitor, and separate line-powered isolator modules Indoor and outdoor breakglass callpoints Single and dual action manual stations Voltage Regulator Module A100-5130 or A010-9917 provides regulated DC voltage for use with Monitor ZAMs 1: Loop Interface Module Basic Reference Compatibility applications requiring compatible Autocall fire alarm control features to be applied to UL listed versions of MX Technology the MX Loop Interface Module provides the necessary monitoring, and control for up to 250 addressable MX per loop. Multiple MX Loop Interface Modules can be installed increased capacity. LEDs provide service level module status indications for earth monitoring, device response, and loop power Technology Features Fastlogic operation for photoelectric sensors and photoelectric/heat sensors. This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0506, 7165-2269:0542 and 7165-2269:0541 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local supplier for the latest status. Rev. 10 2/2021 Loop Interface Modules for 4100ES and 4010ES Fire Alarm Control Panels Fastlogic Sensor Operation Fastlogic sensor operation is an algorithm that takes into account the pattern of smoke build up over time and applies fuzzy logic to calculate the of risk. This algorithm uses over 200 years of fire test data from research at the University of Duisburg (Duisburg, Germany) to determine the that there is a real fire and is designed to achieve faster detection of real fires and slower (preferably no detection) of false alarm sources. Fastlogic Sensor Basics MX Fastlogic algorithm can be described as an Expert algorithm since it uses real fire data as a basis for the alarm decision. For any given we are obliged to employ the most suitable detection in terms of response to an actual fire while minimizing false alarms. This general is clearly reflected in l