Autocall Non-Addressable Audible_Visible Notification Appliances for 4-Wire Operation (Horn_Strobe)

UL, ULC, CSFM Listed, FM* Notification Appliances Audible/Visible Notification Appliances for 4-Wire Operation (Horn/ mount audible/visible notification appliances with efficient horn and high output xenon strobe for 4-wire applications strobe visible notification appliance: 24 VDC operation with switch selection for free-run or synchronized rate Models available with 15, 75, or 110 candela UL listed to Standard 1971 Compatible with ADA requirements, see Installation references Strobe candela rating is clearly indicated on reflector horn audible notification appliance: Low current operation (25 mA @ 24 VDC) Harmonically rich output sound suitable for either coded or steady UL listed to Standard 464 housing colors: Red cover with white “FIRE” lettering White cover with red “FIRE” lettering easy, and convenient semi-flush or surface wall Easily mounts to single gang, double gang, or 4-inch square outlet box Optional mounting adapters are available to cover surface mounted boxes and to adapt to Autocall 2975-9145 boxes Diode polarized inputs for connection to reverse polarity, supervised appliance circuit (NAC) In/out wiring terminals for 18 AWG to 12 AWG, accessible from front of providing easy access for installation, inspection and testing Rear of housing assembly does not extend into box Rugged, high impact, flame retardant thermoplastic housing with covers available to convert housing color Optional UL listed red wire guard is available for semiflush or surface 1: Non-Addressable A/V Appliances are available in Red with Lettering and White with Red Lettering non-addressable audible and visible notification. For requiring audible/visible (A/V) notification with horn tones, Autocall A4903 series appliances combine a high intensity strobe a low current electronic horn in a compact package that is easy and to install. Each appliance can be controlled independently from other using conventional reverse polarity NACs. models with flexible mounting choices. These 4-wire A/V appliances are available with three strobe intensity levels 75, or 110 cd) and with red or off-white housings. Mounting can be or surface mount on a standard single or double gang, or 4 (102 mm) electrical box. Optional accessories are available to mounting and application flexibility. selection selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72); ANSI A117.1; the appropriate model building code, ICBO, or SBCCI, and the application guidelines of the Americans Disabilities Act (ADA). This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7125-2269:0525, 7300-2269:0553 7125-0026:0239 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest Rev. 7 1/2020 Audible/Visible Notification Appliances for 4-Wire Operation (Horn/Strobe) operation non-addressable A/V strobes can be set for free-run operation or synchronized operation using an on-board selection switch. When for synchronized operation, flash operation is controlled from: Synchronized Flash Modules, A4905-9914 (Class B) or A4905-9922 (Class A) 4006, 4007ES Hybrid, 4010ES,and 4100ES Fire Alarm Control Panels (refer to individual product data sheets for details) 4009 IDNet NAC Extender, models A009-9201 and A009-9301 (refer to data sheet AC4009-0002) operation non-addressable A/V horns provide an audible notification output that is a loud and penetrating, harmonically rich sound capable of a or coded output per the controlling NAC capabilities. selection Notification Appliances (Horn/Strobe) 1: Red housing with white FIRE lettering