Home » Autocall Non-Addressable Visible Only Amber Lens Strobes for Emergency Communications
File preview
Click the button below to download immediately for free
Show text preview
UL, ULC, CSFM Listed* Multi-Candela Notification Appliances Visible Only (V/O) Amber Lens Strobes for Emergency Communications only (V/O) 24 VDC wall mount notification appliances with output xenon strobe: Amber lens with “ALERT” lettering produces a signal unique from lens fire alarm evacuation strobes for use with Emergency Systems Intensity is selectable as 15, 30, 75, or 110 candela with visible jumper secured behind strobe housing UL listed to Standard 1638 (due to non-white lens); verified by UL to provide light dispersion patterns of UL Standard 1971 at candela (no derating necessary for amber lens) ULC listed to Standard S526 Polarized input allows connection to compatible reverse polarity, notification appliance circuit (NAC) Regulated circuit design ensures consistent flash output and provides inrush current Rugged, high impact, flame retardant thermoplastic housings are in red or white with amber lens provide synchronized flash for use with: 4100ES Series fire alarm control panels with NACs selected to provide synchronization or SmartSync two-wire horn/strobe control 4009 IDNet NAC Extenders Separate strobe synchronization modules that are available for Class B Class A operation Separate SmartSync Control Modules (SCMs) that provide Class B or A output from conventional NAC inputs Connect amber strobes to NACs dedicated for Emergency Com- operation, not for fire alarm notification housings provides flexible, easy, and convenient semi- or surface mounting: Rear of housing does not extend into box Strobes easily mount to single gang, double gang, or 4-inch square box Wiring terminals are accessible from the front of the housing providing access for installation, inspection, and testing adapters and wire guard: Strobe adapters are available to cover surface mounted electrical and to adapt to 2975-9145 boxes UL listed red wire guard 1: Lens Wall Mount Strobes amber lens multi-candela strobes non-fire alarm alert notification for use with Emergency systems where additional response information is by audio or textual appliances. housings a one-piece assembly (including lens) that mounts to a single or gang, or 4″ square standard electrical box. The cover can be removed (a tool is required) and the enclosure design is impact vandal resistant. Output installation, a selection plug at the back of the housing the desired strobe intensity. An attached flag with black on a highly visible yellow background allows the selected intensity be seen at the side of the strobe lens. Application Reference strobes used as part of an Emergency Communications system located to provide the same area coverage as required of clear lens alarm strobes. Specific Emergency Communications requirements discussed in detail in document UFC 4-021-01 (USA Department of United Facilities Criteria) and in NFPA 72, Chapter 24 (2010 and editions). strobe coverage criteria is further described in the National Alarm and Signaling Code (NFPA 72), ANSI A117.1; the appropriate building code: BOCA, ICBO, or SBCCI; and the application of the Americans with Disabilities Act (ADA). This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0504, 7125-2269:0527 7125-2269:0525 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest Rev. 5 1/2020 Visible Only (V/O) Amber Lens Strobes for Emergency Communications Strobes Strobes multiple strobes and their reflections can be seen from one location, synchronized flashes reduce the probability of photo-sensitive reactions well as the annoyance and possible distraction of random flashing. These multi-candela strobes are synchronized over a two-wire circuit when to compatible NACs, to compatible Synchronized Flash Modules, or to SmartSync Control Modules. Two-Wire Control Reference Alarm Operation two-wire control provides separate horn and strobe control over the same wiring
UL, ULC, CSFM Listed* Multi-Candela Notification Appliances Visible Only (V/O) Amber Lens Strobes for Emergency Communications only (V/O) 24 VDC wall mount notification appliances with output xenon strobe: Amber lens with “ALERT” lettering produces a signal unique from lens fire alarm evacuation strobes for use with Emergency Systems Intensity is selectable as 15, 30, 75, or 110 candela with visible jumper secured behind strobe housing UL listed to Standard 1638 (due to non-white lens); verified by UL to provide light dispersion patterns of UL Standard 1971 at candela (no derating necessary for amber lens) ULC listed to Standard S526 Polarized input allows connection to compatible reverse polarity, notification appliance circuit (NAC) Regulated circuit design ensures consistent flash output and provides inrush current Rugged, high impact, flame retardant thermoplastic housings are in red or white with amber lens provide synchronized flash for use with: 4100ES Series fire alarm control panels with NACs selected to provide synchronization or SmartSync two-wire horn/strobe control 4009 IDNet NAC Extenders Separate strobe synchronization modules that are available for Class B Class A operation Separate SmartSync Control Modules (SCMs) that provide Class B or A output from conventional NAC inputs Connect amber strobes to NACs dedicated for Emergency Com- operation, not for fire alarm notification housings provides flexible, easy, and convenient semi- or surface mounting: Rear of housing does not extend into box Strobes easily mount to single gang, double gang, or 4-inch square box Wiring terminals are accessible from the front of the housing providing access for installation, inspection, and testing adapters and wire guard: Strobe adapters are available to cover surface mounted electrical and to adapt to 2975-9145 boxes UL listed red wire guard 1: Lens Wall Mount Strobes amber lens multi-candela strobes non-fire alarm alert notification for use with Emergency systems where additional response information is by audio or textual appliances. housings a one-piece assembly (including lens) that mounts to a single or gang, or 4″ square standard electrical box. The cover can be removed (a tool is required) and the enclosure design is impact vandal resistant. Output installation, a selection plug at the back of the housing the desired strobe intensity. An attached flag with black on a highly visible yellow background allows the selected intensity be seen at the side of the strobe lens. Application Reference strobes used as part of an Emergency Communications system located to provide the same area coverage as required of clear lens alarm strobes. Specific Emergency Communications requirements discussed in detail in document UFC 4-021-01 (USA Department of United Facilities Criteria) and in NFPA 72, Chapter 24 (2010 and editions). strobe coverage criteria is further described in the National Alarm and Signaling Code (NFPA 72), ANSI A117.1; the appropriate building code: BOCA, ICBO, or SBCCI; and the application of the Americans with Disabilities Act (ADA). This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7300-2269:0504, 7125-2269:0527 7125-2269:0525 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local product supplier for the latest Rev. 5 1/2020 Visible Only (V/O) Amber Lens Strobes for Emergency Communications Strobes Strobes multiple strobes and their reflections can be seen from one location, synchronized flashes reduce the probability of photo-sensitive reactions well as the annoyance and possible distraction of random flashing. These multi-candela strobes are synchronized over a two-wire circuit when to compatible NACs, to compatible Synchronized Flash Modules, or to SmartSync Control Modules. Two-Wire Control Reference Alarm Operation two-wire control provides separate horn and strobe control over the same wiring