Autocall Non-Coded Manual Stations, Cast Metal Construction

UL, C-UL Listed * mechanical and electrical features: Rugged cast metal construction Terminal connections for In/Out Wiring Visible break rod provides status indicator; optional, not required for 1/2 in. deep Standard operation station will mount semi-flush on a single gang box, Operation is compliant with ADA requirements Listed to UL Standard 38 are available with: Single action operation with SPST contacts Dual action PUSH operation with SPST contacts Explosion-proof/weather-proof operation with DPDT contacts 2975-9211, weather-proof surface mount cast aluminum box, provides Type 3R rating** 2975-9212, indoor operation surface mount box metal construction: For applications requiring cast metal these non-coded manual stations provide a variety of and operations. Single action stations are operated by pulling handle. Dual action stations require that you push the top “PUSH” to grab the “PULL” lever. and reset: When pulled, the alarm condition is mechanically and indicated by the extended handle. You can reset by and opening the enclosure. An Autocall key controls the rods: Stations include an optional replacement break rod. Break status is visible from the front of the station. The use of a break rod be a deterrent to vandalism without interfering with the minimum requirements needed for activation. surface mount boxes match the contours of the stations provide an attractive appearance. Model A2099-9144 includes both and enclosure. Use of the 2975-9211 weatherproof box provides NEMA rating. NEMA enclosures are for outdoor use, primarily for against rain and sleet, and ice formation on the exterior. Peripherals Manual Stations, Cast Metal Construction 1: Single Action Manual Station 2: Dual Action Manual Station 3: Explosion-Proof Weather-Proof Manual Station NEMA 3R rating is achieved when used with weatherproof mounting box 2975-9211 and supplied gaskets. Rev 1 02/2021 Manual Stations, Cast Metal Construction selection 1: Manual station models Action Station; SPST, N.O. contact Action Station with PUSH Lever; SPST, N.O. contact ** Explosion-Proof & Weather-Proof Station with Enclosure; DPDT contacts; NEMA 4X rated; UL listed, FM and CSFM Approved for: Groups B, C, and D; Class II, Groups E, F, and G; also FM approved for Class III Groups E, F, and G key for manual station reset UL, C-UL listing, and CSFM approval is under model numbers shown except as noted. For other listing agencies, reference Signal Communications (SIGCOM), model Series SG-32. Accepted for use City of New York Department of Buildings MEA 382-94-E Volume II (SIGCOM). For listings, reference Signal Communications Corporation (SIGCOM) model Series SGX-32; CSFM ref. 7151-1408:0112. 2: Accessories (model A2099-9144 includes enclosure, separate box is not required) Weatherproof Box; cast aluminum construction with gasket kit, required for NEMA 3R rating Surface Mount Box; stamped steel construction replacement break rods ratings (resistive) with 2975-9211 box with 2975-9212 box ratings range connections and handles information 3: Standard application stations C-UL, & CSFM = 1 A @ 30 VDC or 125 VAC; FM = 1 A @ 30 VAC/VDC range = -40 to 150 (-40 to 66 suitable for outdoor applications; NEMA 3R range = 32 to 140 (0 to 60 intended for indoor applications range = up to 90% RH at 90 (32 4: Explosion-Proof & Weather-Proof (Model A2099-9144) A @ 30 VDC, resistive; 10 A @ 120 VAC, resistive to 302 (-55 to 150 suitable for outdoor applications; rated NEMA 4X 5: General specifications (all models) blocks for IN/OUT wiring, up to 14 AWG (2.08 mm2) zinc; both PUSH and PULL handles housings with white levers and white raised lettering to