Autocall Speaker_Visible Notification Appliance with TrueAlert Non-Addressable Strobe, Selectable as Free-Run or Synchronized

UL, ULC, CSFM Listed, FM* Notification Appliances Notification Appliance with TrueAlert Non-Addressable Strobe, Selectable Free-Run or Synchronized selection selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). operation non-addressable S/V strobes can be set for free-run or synchronized operation using an on-board selection switch. selected for synchronized operation, flash operation is controlled Autocall Fire Alarm Control Units providing NACs selected to Autocall strobe synchronization signals (refer to control unit sheet for details) Synchronized Flash Modules, A4905-9914 (Class B) or A4905-9922 A) 4009 IDNet NAC Extender, models A009-9201 and A009-9301 (refer data sheet S4009-0002) notification appliance with multi-tapped speaker high intensity xenon strobe details: High quality voice and tone reproduction with taps for 1/4 W, 1/2 W, 1 or 2 W, at 25 VRMS or 70.7 VRMS Capacitor input for connection to supervised notification appliance Speakers are wired separately from strobe wiring Compliant with NFPA 72, 520 Hz Low Frequency Signal Requirements Sleeping Areas Non-Addressable visible notification appliance Models available with 15, 75, or 110 candela 24 VDC operation with switch selection for free-run or synchronized rate Listed to UL 1971 and ULC S526 Compatible with ADA requirements. Refer to Installation references. Strobe candela rating is clearly indicated on reflector Rugged, high impact, flame retardant thermoplastic housing available red or white (covers are available separately to convert color) UL listed red wire guard is available for surface or semi-flush mounting appliance design provides: Flexible, easy, and convenient flush or surface wall box mounting Separate in/out wiring terminals for speaker and strobe, 18 AWG to 12 non-addressable speaker/visible (S/V) notification combine a multi-tapped speaker and a high intensity strobe provide audio/tone notification and visible notification from the same and strobes are wired separately. The speaker is multi-tapped taps available for either 25 VRMS or 70.7 VRMS and the strobe is for either free-run or synchronized operation. 1: Appliances are available in red white lettering and white with red lettering This product has been approved by the California State Fire Marshal (CSFM) pursuant to Section 13144.1 of the California Health and Safety Code. See CSFM Listings 7320-2269:0502, 7300-2269:0553 and 7320-0026:0247 for allowable values and/or conditions concerning material presented in this document. Additional listings may be applicable; contact your local supplier for the latest status. Rev. 9 3/2020 Notification Appliance with TrueAlert Non-Addressable Strobe, Selectable as Free-Run or Synchronized selection 1: Mounting adapters and boxes mount red adapter skirt mount white adapter skirt when mounting to surface electrical box, 4 in. square, 1/2 in. deep with 1 1/2 in. deep Plate, red, required to mount S/V on 2975-9145 box, red, for surface or flush mount, requires adapter plate (this box may be available for retrofit applications) 2: Synchronized flash control modules 3/4 in. H x 5 3/8 in. W x 3 3/16 in. or 197 mm x 137 mm x 81 mm with S/V = 5 7/8 in. or 149 mm 5/16 in. H x 5 3/4 in. W x 0.060 in. or 211 mm x 146 mm x 1.5 7/8 in. H x 5 1/8 in. W x 2 3/4 in. D 200 mm x 130 mm x 70 mm 3/8 in. W x 2 7/16 in. L x 13/16 in. or 35 mm x 62 mm x 20 mm encapsulated with in/out 18 or 0.82 mm2 wire leads, rated 2 A NAC, requires 5 mA for power to data sheet S4905-0003 additional flash control module Flash Module, Class B (Style Y) operation Flash Module, Class A (Style Z) operation 3: Covers and