Autocall TFX 500M 800M System Overview Manual

AUTOCALL System Overview, Panel Assembly, Start-Up Number 19700367 3, January, 1997 and understand all instructions before proceeding. Autocall TFX-500M and TFX-800M fire protection systems are based and use a mix of new and traditional They are versatile, flexible, and completely suitable for in small to medium sized premises or systems. — ——- =:= =1= = = :i= :1 : :. : : : Autocall TFX-500M is field programmable to for up to 198 individual detection or annunciation points. pOints can be organized into 16 conventional zones and up 240 control-by-event groups. 2-way data circuits (multiplex) provide communication to and a variety of input and output devices. Conventional (non-ad detectors may be connected, individually or in small to the data circuits using the IXA-500DM or IXA-500DMA Detector Modules. The TFX-500 also connects to central stations and municipal fire alarm circuits. Autocall TFX-800M expands the capacity of the TFX-500 to allow up to 990 individual points, 80 zones, and 2-way data (multiplex) circuits. Features and Scalable Packaging TFX to be sized to specific system requirements front,” with locked access to operator control panel and additional locked access to electronics standard Autocall backboxes, and uses Autocall 19- by module format Door Operator Controls-Fire Control Module, Display Module, 16 Indicator Module, 80 Indicator 40 x 2 Indicator Module, 16 Status control Module, Status Control Module. Control Modules may be used for fan control, control, speaker control, zone disconnect switches, phone control, general purpose switches. identification and point messages Operator passcode levels to zone assignment General or selective alarm signalling Non-silenceable waterflow alarms or Evacuation signalling control-by-event functions grouping and manual detector sensitivity adjustment mapping–defines the way the signalling appliance to Alert or Evacuation signal Test reminder–disp!ays a warning message and sends an alert when the routine, weekly test is due. addressable devices, on two 2-way data (multipiex communications)-99 I/O devices per loop. addressable devices, on ten 2-way data I/O devices per loop. common alarm annunciation circuits (1.0 Amp max per Ground Fault detection Waterflow Alarm Device functional testing Manual operation of common alarm and fault relays Features Offsite signalling with City Box Transmitter Drill Condition Indication Fault Isolation (disabling) and De-Isolation (enabling) Silence Reset Test Verification (PIN 940524), Reverse Polarity Module–CVB-500 (PIN 940525), Digital Alarm Transmitter Interface Module-SRA-550 940572). Relay Module-ARM-500 (PIN 9760130) provides relay outputs. InpuVOutput Modules (XIOMs)-IM-16 Input (PIN 976067) and OM-i6 Output Module (PIN inpuVoutput communication functions as driving digital display outputs and accepting digital from volt-free contacts. Printer Options-Autocall Printer option (PIN 976018 or a permanent printed record of system Communications System-Up to 62 TFX-500/800 panels connect to a single TFXnet network (supports up 59,400 analog/addressable points; 4800 zones). RS-485, optic, and dedicated telephone wire communications network nodes is supported. TFX-500M and TFX-800M Operator Manual and Installation Guide 1 This Manual. .. This manual is intended for use by those responsible for installing and operating th