Home » Autocall TrueAlarm CO Sensor Bases for Smoke, Heat, and Photo_Heat Sensors using IDNet Communications
File preview
Click the button below to download immediately for free
Show text preview
Datasheet Peripherals CO Sensor Bases for Smoke, Heat, and Photo/Heat Sensors using IDNet ULC, CSFM Listed, FM operation summary: CO sensor data is stored and analyzed at the panel; a new CO Service provides easy information access 4007ES, 4010ES, and 4100ES panels provide ten (10) year end of life indication with CO sensor expiration notices occurring within 12 and within 6 months, allowing service replacement planning Analog sensor information is digitally transmitted to the host control via IDNet communicationsfor processing to evaluate and track Carbon monoxide concentration in ppm (parts per million) is available viewing from the panel user interface For OSHA compliant CO gas sensing, CO condition level may be by concentration (must be above 30 ppm) 4100ES Audio Control Panels can provide a CO Relocation Message Temporal Code 4 tone and Voice Evacuation (reference see AC4100-0034) features: Sensors may be either wall or ceiling mounted Operation of a CO sensor base with heat sensor provides dual sensor operation New CO test mode allows functional testing of each sensor technology the CO sensor adapter plate Optional accessories include remote alarm LED, alarm relay, and Designed for EMI compatibility Provides magnetic test sensor element is easily replaced when end of service life is to CO sensor replacement cartridge (CORC, A4098-9747) removal of interchangeable sensor head providing tamper (sensor removal causes a trouble condition) Sensor Base Description monoxide (CO) is an odorless, colorless, tasteless gas by the incomplete combustion of heating fuels such as coal, heating oil, and natural gas. CO is also a byproduct of materials experiencing unintentional fire or even incipient fire Monitoring of CO levels can warn of physically harmful however, sensing of CO levels below the harmful can also provide improved understanding of incipient fire when evaluated in combination with photoelectric fire sensor from the same location. CO sensor bases combine an electrolytic CO sensing module a TrueAlarm analog sensor to provide a single multiple sensing using one system address. The CO sensor can be enabled/ used in LED/Switch modes and custom control, and can be public for communication across a fire alarm Network. sensor operation is similar to other TrueAlarm sensors or heat). It provides current analog values, average analog “No Answer” troubles, “Wrong Device” troubles, over threshold, in ppm, and monitors for the presence of the CO sensor. mounted address selection allows the address to remain with its when the sensor is removed for service or type change. Address is from the front, under the removable sensor. An integral red indicates power-on by pulsing, or alarm or trouble when steady and also provides test mode status (see page 3). Detailed status is at the fire alarm control panel. 1: CO Sensor Base with Sounder with A4098-9754 Photo/Heat Sensor) addressable CO sensor bases contain a carbon (CO) sensing module providing both CO toxic gas and enhanced fire detection: For use with 4007ES; and 4010ES or 4100ES fire alarm control panels software revision 2.01.02 or higher CO sensor bases support (and require) a TrueAlarm photoelectric, or heat sensor (ordered separately) Model A4098-9770 provides standard features, model A4098-9771 provides a piezoelectric sounder CO sensor bases are multi-point devices, consume only one IDNet and receive both communications and sensor power from IDNet channel (the sounder base requires separate 24 VDC system or NAC connection) Listed to UL 268, Smoke Detectors for Fire Alarm Signaling Systems UL 2075, Gas and Vapor Detectors and Sensors; allowing systems be listed to Standard 2034, Single and Multiple Station Carbon Alarms Listed by ULC to CSA 6.19-01 Residential Carbon Monoxide Alarming Three types of CO influenced operation are available; UL 2034 CO detection; UL 2075 CO (OSHA) level monitoring for ventilation and multi-criteria fire sensor analysis with algorithms that optical and CO gas monitoring information
Datasheet Peripherals CO Sensor Bases for Smoke, Heat, and Photo/Heat Sensors using IDNet ULC, CSFM Listed, FM operation summary: CO sensor data is stored and analyzed at the panel; a new CO Service provides easy information access 4007ES, 4010ES, and 4100ES panels provide ten (10) year end of life indication with CO sensor expiration notices occurring within 12 and within 6 months, allowing service replacement planning Analog sensor information is digitally transmitted to the host control via IDNet communicationsfor processing to evaluate and track Carbon monoxide concentration in ppm (parts per million) is available viewing from the panel user interface For OSHA compliant CO gas sensing, CO condition level may be by concentration (must be above 30 ppm) 4100ES Audio Control Panels can provide a CO Relocation Message Temporal Code 4 tone and Voice Evacuation (reference see AC4100-0034) features: Sensors may be either wall or ceiling mounted Operation of a CO sensor base with heat sensor provides dual sensor operation New CO test mode allows functional testing of each sensor technology the CO sensor adapter plate Optional accessories include remote alarm LED, alarm relay, and Designed for EMI compatibility Provides magnetic test sensor element is easily replaced when end of service life is to CO sensor replacement cartridge (CORC, A4098-9747) removal of interchangeable sensor head providing tamper (sensor removal causes a trouble condition) Sensor Base Description monoxide (CO) is an odorless, colorless, tasteless gas by the incomplete combustion of heating fuels such as coal, heating oil, and natural gas. CO is also a byproduct of materials experiencing unintentional fire or even incipient fire Monitoring of CO levels can warn of physically harmful however, sensing of CO levels below the harmful can also provide improved understanding of incipient fire when evaluated in combination with photoelectric fire sensor from the same location. CO sensor bases combine an electrolytic CO sensing module a TrueAlarm analog sensor to provide a single multiple sensing using one system address. The CO sensor can be enabled/ used in LED/Switch modes and custom control, and can be public for communication across a fire alarm Network. sensor operation is similar to other TrueAlarm sensors or heat). It provides current analog values, average analog “No Answer” troubles, “Wrong Device” troubles, over threshold, in ppm, and monitors for the presence of the CO sensor. mounted address selection allows the address to remain with its when the sensor is removed for service or type change. Address is from the front, under the removable sensor. An integral red indicates power-on by pulsing, or alarm or trouble when steady and also provides test mode status (see page 3). Detailed status is at the fire alarm control panel. 1: CO Sensor Base with Sounder with A4098-9754 Photo/Heat Sensor) addressable CO sensor bases contain a carbon (CO) sensing module providing both CO toxic gas and enhanced fire detection: For use with 4007ES; and 4010ES or 4100ES fire alarm control panels software revision 2.01.02 or higher CO sensor bases support (and require) a TrueAlarm photoelectric, or heat sensor (ordered separately) Model A4098-9770 provides standard features, model A4098-9771 provides a piezoelectric sounder CO sensor bases are multi-point devices, consume only one IDNet and receive both communications and sensor power from IDNet channel (the sounder base requires separate 24 VDC system or NAC connection) Listed to UL 268, Smoke Detectors for Fire Alarm Signaling Systems UL 2075, Gas and Vapor Detectors and Sensors; allowing systems be listed to Standard 2034, Single and Multiple Station Carbon Alarms Listed by ULC to CSA 6.19-01 Residential Carbon Monoxide Alarming Three types of CO influenced operation are available; UL 2034 CO detection; UL 2075 CO (OSHA) level monitoring for ventilation and multi-criteria fire sensor analysis with algorithms that optical and CO gas monitoring information