Autocall TrueAlert ES Addressable Speakers USWeather Proof Wall Mount Notification Appliances Installation

TrueAlert ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Instructions warnings, and regulatory information When the notification appliance emits light or sound, it indicates the possibility of an emergency situation that requires immediate atten- of all occupants. Always install, maintain, and test notification appliances within their specifications. Failure to follow all safety precautions instructions may result in loss of life and property due to non-functioning notification appliances. Some notification appliances high voltage. To avoid electrical hazards and avoid damage to appliances, make sure that the electrical power for the Notification Circuit is disconnected at the control unit before installing, repairing, or internally adjusting any notification appliances. Even electrical power removed, some notification appliances (such as visible strobes) store a high voltage charge. The high voltage can injury resulting in death from electrical shock. DO NOT TOUCH EXPOSED CIRCUITRY. REFERENCE: Location and quantity of appliances required must conform to the applicable local standards and guidelines National Fire Alarm and Signaling Code (NFPA 72); ULC Standard CAN/ULC-S524, Installation of Fire Alarm Systems; the appropriate building codes) and specific requirements of the local Authority Having Jurisdiction (AHJ). These notification appliances are not for installation within hazardous locations as defined by the National Electrical Code (NEC) or NFPA. appliances provide a speaker only (SO) or speaker/visible (S/V) warning of an alarm condition when activated from the control unit of a UL/ULC Listed, Autocall Fire Alarm System. Consult Autocall Fire Alarm unit documentation for compatibility information. The speakers can turned ON or OFF individually under compatible unit control. Mount with cover colors Red White Mount Only with cover Red White 1: Products boxes: boxes: contents: included: x 1 one in. thread forming screws x 4 a backplate separately for each appliance. a back box, listed above, to mount the appliance assembly to the wall. a cover, listed above, separately for each appliance. For information about TrueAlert ES appliance testing, see TrueAlert ES Addressable Appliances Testing and Application Guide (579-1049AC). operation levels 49 S/V appliances have multiple strobe intensity levels. Levels W15, W75, W110, and W185 are rated for UL outdoor private mode applications. 15 and 75 are rated for UL indoor and uncontrolled wet Public Mode applications. box mounting instructions the mounting location and install the back box, see the back box installation instructions or for more information. the building wiring through the rectangular opening in the backplate. the building wires to the backplate, see Wiring instructions. Rev. B ES Addressable US/Weather Proof Wall Mount Speaker Notification Appliances Installation the backplate to the electrical box using the provided hardware. Install the backplate so that the contacts are above the opening for the the appliance settings. See Setting the address DIP switch. attach the cover to the appliance, carefully move the cover over the housing. Move the cover down over the housing and press it until it snaps the housing. the assembled appliance to the backplate. 1: box mounting instructions removal or disassembly Use a blade screwdriver to catch the latches on the left side of the cover, angling the head out from the appliance and then lifting. Repeat this on latch in turn, until the cover rotates away. a blade screwdriver into the gap between the housing and backplate at the bottom of the assembled applia