Autocall VESDA-E VES Aspirating Smoke Detectors with IDNet Communications

Datasheet Detection Products VESDA-E VES Aspirating Smoke Detectors with IDNet Communications devices communicate on VESDAnet, a bi-directional network that provides continued redundant operation single point wiring failures. VESDAnet enables centralized control, maintenance, and monitoring. CSFM Listed* Autocall VESDA-E VES IDNet series of smoke detectors are similar the VESDA-E VEP aspirating smoke detectors, but include a valve in the inlet manifold and software to control the airflow the four sectors or pipes. Using this configuration, you can divide single zone into four separate sectors, for example, distinguishing separate aisles within a data room. With the VES, the user can the source of smoke by identifying the first sector to reach the level. The detector then continues to sample from all sectors to fire growth and report separate alarm levels for each sector. In the VES delivers a range of revolutionary features that provide value. it works VES draws air from all sectors in use. If the smoke level reaches the Scan Threshold, the VES quickly scans each sector to identify sector is carrying smoke. The first sector to reach the Alert level designated as the First Alarm Sector (FAS) and is signalled to the user. two or more sectors reach the Alert level, the sector with the highest concentration is designated as the FAS. When the Fast Scan and identifies the FAS, the VES continues to monitor all four to track fire growth and maintain full protection of the area. VES aspirating smoke detector with on-board IDNet communications Compatible with Autocall 4007ES, 4010ES, and 4100ES fire alarm units (FACU). Adds IDNet communications to the VESDA-E VES aspirating smoke Communicates status information, and receives commands from the FACU. detection technology is the revolutionary detection chamber that forms the core of VESDA-E VES, providing higher stability and increased longevity. It better detection and fewer nuisance alarms with direct imaging the sampled particles using a CMOS imager, combined with multiple commissioning, and operation VES aspirator provides a total pipe length of 1,706 ft (520 m). operation is possible with AutoConfig which initiates normalization. Xtralis ASPIRE and VSC software applications fully the VES, for easy pipe network design, system commissioning, maintenance. You can initiate the AutoLearn Smoke and Flow from VSC. host FACU operations include the following: Initiate detector reset Request standby mode Request disable mode Airflow normalization Silence detector host FACU information received includes the following: Four alarm states: alert pre-alarm, action pre-alarm, fire 1, fire 2 Urgent fault status, minor fault status, and standby status Analog values for smoke obscuration percentage and detector fault 1: Autocall VESDA-E VES IDNet detector with addressable four-pipe: A4098-VES-A00-P 2: Autocall VESDA-E VES IDNet detector with 3.5 display, addressable four-pipe: A4098-VES-A10-P Autocall VESDA-E VES IDNet series of aspirating smoke detectors a range of features that provide user value, including the Sector addressability for up to four sectors Adaptive scan threshold Flair detection technology, for reliable early warning in a wide range of with minimal nuisance alarms Multi stage filtration and optical protection with clean air barriers, for detection performance Four configurable alarm levels for each sector and a wide sensitivity for optimum protection for the widest range of applications An intuitive LCD display, providing instant status information for response Flow fault thresholds for each port, accommodating varying airflow A smart onboard filter tracks dust count and remaining filter life for maintenance An extensive log of up to 20,000 events for analysis and system AutoLearn smoke and flow for reliable and rapid commissioning Ethernet for connectivity with Xtralis software for configuration, monitoring, and maintenance Secondary monitoring and maintenance through Wi-Fi USB for