Home » Autocall Visible Notification Appliances with Synchronized Flash; Non-Addressable, SmartSync Operation Compatible
File preview
Click the button below to download immediately for free
Show text preview
Datasheet Multi-Candela Notification Appliances Notification Appliances with Synchronized Flash; Non-Addressable, SmartSync Compatible ULC, CSFM Listed, FM TrueAlert synchronized strobes provide convenient to standard electrical boxes. The enclosure designs are both and vandal resistant and provide a convenient strobe intensity Since each model can be selected for intensity output, on- model inventory is minimized and changes encountered during can be easily accommodated. mount strobe housings are a one-piece assembly (including lens) mounts to a single or double gang, or 4″ square standard electrical The cover can be quickly removed (a tool is required) and covers are separately for color conversion. mount strobes install using standard single gang electrical Color choice is determined by model number. Intensity Selection installation, a selection plug at the back of the housing the desired strobe intensity. An attached flag with black on a highly visible yellow background allows the selected intensity be seen at the side of the strobe lens. Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). Strobes Strobes. When multiple strobes and their reflections can be from one location, synchronized flashes reduce the probability photo-sensitive reactions as well as the annoyance and possible of random flashing. These multi-candela strobes are over a two-wire circuit when connected to compatible to compatible Synchronized Flash Modules, or to SmartSync Modules. Two-Wire Control applications desire the audible notification appliances to be of being silenced before the alarm condition is reset (on-until- while the visible notification appliances are kept activated until alarm condition is reset (on-until-reset). SmartSync operation mode this function using a single circuit (two-wire operation). Control Sources two-wire control is available from: Hybrid, 4010ES, 4100ES Fire Alarm Control Panels (refer to product data sheets for more information) IDNet NAC Extenders (refer to data sheet AC4009-0002 ) Control Module (SCM) Model A4905-9938 (refer to data sheet ) SmartSync compatible notification appliances include horns and combination horn/strobe notification appliances. more information refer to installation instructions, . 1: Mount Strobes 2: Mount Strobes only (V/O) 24 VDC notification appliances with high output strobe, available for wall or ceiling mount: Intensity is selectable as 15, 30, 75, or 110 candela with visible jumper secured behind strobe housing Operation is compatible with ADA requirements (refer to Installation Surface or Semi-Flush Wall Mounting) Polarized input allows connection to compatible reverse polarity, notification appliance circuit (NAC) Regulated circuit design ensures consistent flash output and provides inrush current Rugged, high impact, flame retardant thermoplastic housings are in red or white with clear lens Listed to UL 1971 and ULC S526 NEMA 1 rated. See Product Selection for more information provide synchronized flash for use with: Autocall fire alarm control panels with NACs selected to provide strobe or SmartSync two-wire control 4009 IDNet NAC Extenders Separate strobe Synchronization Modules that are available for Class B Class A operation Separate SmartSync Control Modules (SCMs) that provide Class B or A output from conventional NAC inputs housings provides flexible, easy, and convenient semi- or surface wall mounting: Rear of housing does not extend into box Wall mount strobes easily mount to single gang, double gang, or 4-inch outlet box Ceiling mount strobes mount to single gang boxes mount strobe features: Wiring terminals are accessible from the front of the housing providing access for installation, inspection, and testing Covers are available separately to convert
Datasheet Multi-Candela Notification Appliances Notification Appliances with Synchronized Flash; Non-Addressable, SmartSync Compatible ULC, CSFM Listed, FM TrueAlert synchronized strobes provide convenient to standard electrical boxes. The enclosure designs are both and vandal resistant and provide a convenient strobe intensity Since each model can be selected for intensity output, on- model inventory is minimized and changes encountered during can be easily accommodated. mount strobe housings are a one-piece assembly (including lens) mounts to a single or double gang, or 4″ square standard electrical The cover can be quickly removed (a tool is required) and covers are separately for color conversion. mount strobes install using standard single gang electrical Color choice is determined by model number. Intensity Selection installation, a selection plug at the back of the housing the desired strobe intensity. An attached flag with black on a highly visible yellow background allows the selected intensity be seen at the side of the strobe lens. Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). Strobes Strobes. When multiple strobes and their reflections can be from one location, synchronized flashes reduce the probability photo-sensitive reactions as well as the annoyance and possible of random flashing. These multi-candela strobes are over a two-wire circuit when connected to compatible to compatible Synchronized Flash Modules, or to SmartSync Modules. Two-Wire Control applications desire the audible notification appliances to be of being silenced before the alarm condition is reset (on-until- while the visible notification appliances are kept activated until alarm condition is reset (on-until-reset). SmartSync operation mode this function using a single circuit (two-wire operation). Control Sources two-wire control is available from: Hybrid, 4010ES, 4100ES Fire Alarm Control Panels (refer to product data sheets for more information) IDNet NAC Extenders (refer to data sheet AC4009-0002 ) Control Module (SCM) Model A4905-9938 (refer to data sheet ) SmartSync compatible notification appliances include horns and combination horn/strobe notification appliances. more information refer to installation instructions, . 1: Mount Strobes 2: Mount Strobes only (V/O) 24 VDC notification appliances with high output strobe, available for wall or ceiling mount: Intensity is selectable as 15, 30, 75, or 110 candela with visible jumper secured behind strobe housing Operation is compatible with ADA requirements (refer to Installation Surface or Semi-Flush Wall Mounting) Polarized input allows connection to compatible reverse polarity, notification appliance circuit (NAC) Regulated circuit design ensures consistent flash output and provides inrush current Rugged, high impact, flame retardant thermoplastic housings are in red or white with clear lens Listed to UL 1971 and ULC S526 NEMA 1 rated. See Product Selection for more information provide synchronized flash for use with: Autocall fire alarm control panels with NACs selected to provide strobe or SmartSync two-wire control 4009 IDNet NAC Extenders Separate strobe Synchronization Modules that are available for Class B Class A operation Separate SmartSync Control Modules (SCMs) that provide Class B or A output from conventional NAC inputs housings provides flexible, easy, and convenient semi- or surface wall mounting: Rear of housing does not extend into box Wall mount strobes easily mount to single gang, double gang, or 4-inch outlet box Ceiling mount strobes mount to single gang boxes mount strobe features: Wiring terminals are accessible from the front of the housing providing access for installation, inspection, and testing Covers are available separately to convert