Home » Autocall Visual Only Notification Appliances, Weatherproof Ceiling Mount Strobe, Model Series A49VO
File preview
Click the button below to download immediately for free
Show text preview
UL, ULC Listed* ES Addressable Notification Appliances Only Notification Appliances, Weatherproof Ceiling Mount Strobe, Model Series Mount Addressable Visible (VO) Notification Appliances individually powered, addressed, and controlled from an Autocall alarm control panel IDNAC signaling line circuit (SLC). VO notification use a multi-candela strobe with synchronized 1 Hz flash rate selectable candela rating. LED and Xenon tube strobes devices are on the same IDNAC channel. Order the appliance and separately to simplify the ordering and installation process. addressed visible only (VO) notification appliances Multi-candela LED strobe available in 110 cd, 135 cd and 185 cd range models. Small compact design and low current draw due to energy efficient tube strobes, with LED indicators. Advanced addressable notification controlled by IDNAC SLCs. IDNAC SLCs provide regulated 29 VDC allowing strobes to operate lower current. Remove the cover to access the electrical test point. Program the strobe intensity from the control panel or the device. Wiring supervision to each appliance allows T-tap connections for Class circuits to simplify wiring (Class A circuits require in/out wiring). Self-Test Mode allows on-board sensors to detect the strobe output report the status to the control panel. TrueAlert Device Reports at the control panel detail appliance point ID, label, type, and candela setting. Magnet test diagnostics assist checkout and testing of the appliances wiring. Compatibility with ADA requirements. Strobe operation is listed to UL Standard 1971 and ULC Standard Synchronized strobe operation on IDNAC channel. indicator and Magnet Test feature: Indicator LED indicates magnet test acknowledgment, three-digit address, and candela rating. Indicator LED can be configured to blink every polling cycle to indicate supervision. When the controller is in diagnostic mode, the magnet test pulses the LED to indicate the appliance address, and can also be set to flash the strobe LEDs. design features Rugged, high impact, flame retardant thermoplastic housing available a variety of colors and lettering. Separate covers are available for replacement, or to change the Various covers and lettering options available, red with white letters or type onsite. with red letters. Covers can be easily removed without disturbing the connected avoiding trouble conditions. In/out wiring terminals for 18 AWG to 12 AWG. Optional wire guards. 1: ES Addressable Strobe application reference selection of visible notification is dependent on occupancy, and local codes. addressable wiring isolator model A4905-9929 model A4905-9929 is available for remote mounting on addressable circuits to isolate short circuited wiring from wiring. Refer to data sheet AC4905-0001 for additional Additional listings may be applicable; contact your local Autocall product supplier for the latest status. Rev. 1 7/2019 Only Notification Appliances, Weatherproof Ceiling Mount Strobe, Model Series A49VO ES diagnostics features can be selected to pulse each appliance LED when it receives a supervision poll. When the controller is selected for diagnostic mode, the magnet test feature provides a response at the individual appliance being tested. details Self-Test Mode from the control panel allows on-board sensors, depending on the device type, to detect its own strobe and/or horn output then report their status to the control panel. Operation is by selected VNAC appliance groups and is either automatic (all briefly simultaneously or individually activated by applying a magnet. Refer to control panel data sheet for more Self-Test information. appliance Magnet Test appliance LED pulses sequentially to conveniently indicate the appliance address when a magnet is applied. appliance Magnet Test this test mode, after the address is indicated by pulsing the appliance LED, the strobe will briefly flash to indicate correct operation. Instrument Two (TSIT) second generation of the Autocall TrueStart Test Instrument add
UL, ULC Listed* ES Addressable Notification Appliances Only Notification Appliances, Weatherproof Ceiling Mount Strobe, Model Series Mount Addressable Visible (VO) Notification Appliances individually powered, addressed, and controlled from an Autocall alarm control panel IDNAC signaling line circuit (SLC). VO notification use a multi-candela strobe with synchronized 1 Hz flash rate selectable candela rating. LED and Xenon tube strobes devices are on the same IDNAC channel. Order the appliance and separately to simplify the ordering and installation process. addressed visible only (VO) notification appliances Multi-candela LED strobe available in 110 cd, 135 cd and 185 cd range models. Small compact design and low current draw due to energy efficient tube strobes, with LED indicators. Advanced addressable notification controlled by IDNAC SLCs. IDNAC SLCs provide regulated 29 VDC allowing strobes to operate lower current. Remove the cover to access the electrical test point. Program the strobe intensity from the control panel or the device. Wiring supervision to each appliance allows T-tap connections for Class circuits to simplify wiring (Class A circuits require in/out wiring). Self-Test Mode allows on-board sensors to detect the strobe output report the status to the control panel. TrueAlert Device Reports at the control panel detail appliance point ID, label, type, and candela setting. Magnet test diagnostics assist checkout and testing of the appliances wiring. Compatibility with ADA requirements. Strobe operation is listed to UL Standard 1971 and ULC Standard Synchronized strobe operation on IDNAC channel. indicator and Magnet Test feature: Indicator LED indicates magnet test acknowledgment, three-digit address, and candela rating. Indicator LED can be configured to blink every polling cycle to indicate supervision. When the controller is in diagnostic mode, the magnet test pulses the LED to indicate the appliance address, and can also be set to flash the strobe LEDs. design features Rugged, high impact, flame retardant thermoplastic housing available a variety of colors and lettering. Separate covers are available for replacement, or to change the Various covers and lettering options available, red with white letters or type onsite. with red letters. Covers can be easily removed without disturbing the connected avoiding trouble conditions. In/out wiring terminals for 18 AWG to 12 AWG. Optional wire guards. 1: ES Addressable Strobe application reference selection of visible notification is dependent on occupancy, and local codes. addressable wiring isolator model A4905-9929 model A4905-9929 is available for remote mounting on addressable circuits to isolate short circuited wiring from wiring. Refer to data sheet AC4905-0001 for additional Additional listings may be applicable; contact your local Autocall product supplier for the latest status. Rev. 1 7/2019 Only Notification Appliances, Weatherproof Ceiling Mount Strobe, Model Series A49VO ES diagnostics features can be selected to pulse each appliance LED when it receives a supervision poll. When the controller is selected for diagnostic mode, the magnet test feature provides a response at the individual appliance being tested. details Self-Test Mode from the control panel allows on-board sensors, depending on the device type, to detect its own strobe and/or horn output then report their status to the control panel. Operation is by selected VNAC appliance groups and is either automatic (all briefly simultaneously or individually activated by applying a magnet. Refer to control panel data sheet for more Self-Test information. appliance Magnet Test appliance LED pulses sequentially to conveniently indicate the appliance address when a magnet is applied. appliance Magnet Test this test mode, after the address is indicated by pulsing the appliance LED, the strobe will briefly flash to indicate correct operation. Instrument Two (TSIT) second generation of the Autocall TrueStart Test Instrument add