Autocall Wall Mount Addressable Horns, Model Series 59AO

UL, ULC Approved, FM addressable TrueAlert ES indoor and weatherproof horns Advanced addressable notification controlled by IDNAC SLCs providing 29 VDC allow strobes on the same Signaling Line Circuits to operate with lower current even under battery backup Wiring supervision to each appliance allows T-tapped” connections for B circuits to simplify wiring (Class A circuits require in/out wiring) Self-test mode detects the horn output and then reports the status to control panel Separate control of horns from visible appliances on the same SLC with panel selection of operation as: Temporal Code 3, March Time as 20, 60, or 120 bpm), Continuous, or Temporal Code 4 High and low outputs (~6 dBA difference), selectable at the appliance from the controller with FACP mode selected at the appliance Magnet test diagnostics to test appliances and wiring Listed to UL Standard 464 and ULC Standard S525 Synchronized piezo operation on the same IDNAC channel Indicator and Magnet Test Indicator LED can be selected to display each polling cycle to indicate supervision When the controller is in diagnostic mode, the Magnet Test pulses LED to indicate appliance address and is selectable to also briefly the horn to confirm operation design features Rugged, high impact, flame retardant thermoplastic housing in red and Various covers options are available Red with white letters or white colors red letters Compatibility with ADA requirements Covers available in a selection of FIRE or ALERT lettering Covers can be easily removed without disturbing the connected and avoiding trouble conditions In/out wiring terminals for 18 AWG to 12 AWG Indoor model mounts to single gang US electrical boxes Weatherproof model mounts to single gang weatherproof electrical Additional listings may be applicable; contact your local product supplier for the latest status. Addressable Notification Appliances Mount Addressable Horns, Model Series 59AO 1: TrueAlert ES A59AO series Addressable are Available in Red with White and White with Red Lettering ES 59 Series addressable horns individually addressed audible notification appliances that receive supervision, and control signals from a Autocall fire alarm control providing IDNAC SLCs. ES Operation Advantage circuit integrity ES A/O addressable appliances on IDNAC SLCs provide audible using a single two-wire circuit that also confirms connection the individual notification appliance electronic circuit. This provides that extends beyond the appliance wiring connections. current usage on IDNAC SLCs constant 29 VDC source voltage is maintained, even during battery This allows strobes to operate at higher voltage with lower and ensuring a consistent current draw and voltage drop under both primary power and secondary battery standby. include wiring distances up to 2 to 3 times farther than with notification, support for more appliances per IDNAC SLC, of smaller gauge wiring, or combinations of these benefits. Installation and Testing Time time and expense for retrofit or new construction is reduced with separate controls on the same two-wire When Class B wiring is used, wiring can be “T” tapped, allowing savings in distance, wire, conduit (size and utilization), and installation efficiency. Use of Self-Test and Magnet Test features installation efficiency. TrueAlert device reports conveniently information about each connected appliance. Rev. 4 04/2021 Mount Addressable Horns, Model Series 59AO ES Diagnostics allows appliance operation to be confirmed without leaving the control panel. Operation is by selected VNAC appliance groups and is or individually activated by applying a magnet. Refer to control panel data sheet for more self-test information, see IDNAC SLC Controller Reference. Test Test features indicate device location by pulsing the indicator LED briefly, and briefly sounding the horn. The indicator LED can be pulsed to indicate appliance address. The horn can also be briefly sounded to indicate proper operation. Instrument Two (TSIT) Instrume