Home » Autocall Wall Mount Weatherproof Visible and Audible_Visible Notification Appliances
File preview
Click the button below to download immediately for free
Show text preview
Datasheet Addressable Notification Appliances Mount Weatherproof Visible and Audible/Visible Notification Appliances ULC Approved, FM blank Mounting matches weatherproof boxes (required), ordered separately Separate covers are available to change application type on-site or for In/out wiring terminals for 18 AWG to 12 AWG Enclosure is rated NEMA 3R Convenient wiring terminal access at front of housing listings: UL 1638 listed for outdoor applications with strobe rated at 75 cd or 185 cd (WP185) UL 1971 listed for indoor applications with strobe intensity selectable 15 or 75 cd; indoor applications are compatible with ADA Horn operation is listed to UL Standard 464 Refer to data sheet AC49WP-0002 for ULC listed models A/V Models with horn: Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is “high” or “low” (~5 dBA difference) selectable at the appliance from the controller with FACU mode selected at the appliance Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). ES Operation visible and audible notification ES addressable appliances on IDNAC SLCs provide separate and audible notification using a single two-wire circuit that also connection to the individual notification appliance electronic This operation increases circuit supervision integrity by providing that extends beyond the appliance wiring connections. current allows efficient IDNAC SLC operation IDNAC SLCs, a constant 29 VDC source voltage is maintained, even battery standby, allowing strobes to operate at higher voltage lower current and ensuring a consistent current draw and voltage margin under both primary power and secondary battery standby. include wiring distances up to 2 to 3 times farther than with notification, or support for more appliances per IDNAC SLC, use of smaller gauge wiring, or combinations of these benefits, all installation and maintenance savings with high assurance that that operate during normal system testing will operate during case alarm conditions. Installation and Testing Time. separate controls on the same two-wire SLC, installation time and for both retrofit and new construction can be significantly When Class B wiring is used, wiring can be “T” tapped, allowing savings in distance, wire, conduit (size and utilization), and installation efficiency. Use of Self-Test and Magnet Test features Rev. 7 03/2021 1: A/V (top) and Strobe (bottom), view of A/V on Weatherproof Mounting Boxes (right) ES weatherproof addressable appliances provide visible audible/visible notification for indoor and outdoor, extended and extended humidity applications. They are individually and receive power, supervision, and control signals from an fire alarm control unit providing IDNAC Signaling Line Circuits addressed and controlled multi-candela TrueAlert ES notification appliances for extended temperature humidity range provide: Multi-candela xenon strobe with synchronized 1 Hz flash rate and with programmable from the control unit or jumper selected as 15, WP 75, or WP 185 cd Advanced addressable notification controlled by IDNAC SLCs providing 29 VDC allowing strobes to operate with lower current even battery backup Wiring supervision to each appliance allowing “T-tapped” connections Class B circuits to simplify wiring (Class A circuits require in/out Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control unit TrueAlert Device Reports at the control unit detailing appliance point custom label, type, and candela setting Magnet Test diagnostics to assist checkout and testing of appliances wiring Electr
Datasheet Addressable Notification Appliances Mount Weatherproof Visible and Audible/Visible Notification Appliances ULC Approved, FM blank Mounting matches weatherproof boxes (required), ordered separately Separate covers are available to change application type on-site or for In/out wiring terminals for 18 AWG to 12 AWG Enclosure is rated NEMA 3R Convenient wiring terminal access at front of housing listings: UL 1638 listed for outdoor applications with strobe rated at 75 cd or 185 cd (WP185) UL 1971 listed for indoor applications with strobe intensity selectable 15 or 75 cd; indoor applications are compatible with ADA Horn operation is listed to UL Standard 464 Refer to data sheet AC49WP-0002 for ULC listed models A/V Models with horn: Harmonically rich output sound for either coded or steady operation Horns sound as Temporal Code 3, March Time pattern, continuous; or Code 4, controlled separately from visible appliances on the two-wire circuit Selectable March Time rates of 20, 60, or 120 beats per minute Output is “high” or “low” (~5 dBA difference) selectable at the appliance from the controller with FACU mode selected at the appliance Application Reference selection of visible notification is dependent on occupancy, local codes, and proper applications of: the National Fire Alarm (NFPA 72), ANSI A117.1; the appropriate model building code: ICBO, or SBCCI; and the application guidelines of the Americans Disabilities Act (ADA). ES Operation visible and audible notification ES addressable appliances on IDNAC SLCs provide separate and audible notification using a single two-wire circuit that also connection to the individual notification appliance electronic This operation increases circuit supervision integrity by providing that extends beyond the appliance wiring connections. current allows efficient IDNAC SLC operation IDNAC SLCs, a constant 29 VDC source voltage is maintained, even battery standby, allowing strobes to operate at higher voltage lower current and ensuring a consistent current draw and voltage margin under both primary power and secondary battery standby. include wiring distances up to 2 to 3 times farther than with notification, or support for more appliances per IDNAC SLC, use of smaller gauge wiring, or combinations of these benefits, all installation and maintenance savings with high assurance that that operate during normal system testing will operate during case alarm conditions. Installation and Testing Time. separate controls on the same two-wire SLC, installation time and for both retrofit and new construction can be significantly When Class B wiring is used, wiring can be “T” tapped, allowing savings in distance, wire, conduit (size and utilization), and installation efficiency. Use of Self-Test and Magnet Test features Rev. 7 03/2021 1: A/V (top) and Strobe (bottom), view of A/V on Weatherproof Mounting Boxes (right) ES weatherproof addressable appliances provide visible audible/visible notification for indoor and outdoor, extended and extended humidity applications. They are individually and receive power, supervision, and control signals from an fire alarm control unit providing IDNAC Signaling Line Circuits addressed and controlled multi-candela TrueAlert ES notification appliances for extended temperature humidity range provide: Multi-candela xenon strobe with synchronized 1 Hz flash rate and with programmable from the control unit or jumper selected as 15, WP 75, or WP 185 cd Advanced addressable notification controlled by IDNAC SLCs providing 29 VDC allowing strobes to operate with lower current even battery backup Wiring supervision to each appliance allowing “T-tapped” connections Class B circuits to simplify wiring (Class A circuits require in/out Self-Test Mode allows on-board sensors to detect the strobe and horn and then report their status to the control unit TrueAlert Device Reports at the control unit detailing appliance point custom label, type, and candela setting Magnet Test diagnostics to assist checkout and testing of appliances wiring Electr