Autocall A2098 Series End-of-Line Voltage Monitor Relays, Plate Mounted, 24 VDC or 120 VAC

UL ULC CSFM Listed Accessories Series End of Line Voltage Monitor Relays Plate Mounted 24 VDC or 120 VAC Rating Box 1 Common Specifications A resistive 24 VDC 120VAC Gang 2 in 51 mm minimum depth coded wire leads 18 AWG 0.82 mm2 2 A2098 9735 24 VDC Nominal Operation Voltage Voltage Current VDC to 31 VDC 5 VDC must dropout at 3 VDC mA maximum 31 VDC Voltage Monitor Relay provides isolated monitoring operating voltage For use with 4 wire detectors and similar fire alarm system products Model A2098 9735 operates at 24 VDC Relay contact provides continuity to end of line supervision while loss of power opens supervisory path causing a trouble at the monitoring panel UL listed to Standard 864 steel cover plate allows convenient mounting for easy Mounts in single gang box 2 in 51 mm deep Easy to locate for convenient access end of line relays provide zone voltage monitoring mounted a single gang plate for easy access Upon loss of voltage the relay opens breaking continuity to the end of line zone wiring resistor to data sheet AC4081 0003 for A4081 Series End of line Resistor 1 Relay Cover Plate This product has been approved by the California State Fire Marshal CSFM pursuant to Section 13144.1 of the California Health and Safety Code See CSFM Listing 7300 2269 0550 for allowable and or conditions concerning material presented in this document Additional listings may be applicable contact your local product supplier for the latest status Rev 5 1 2020 Reference Series End of Line Voltage Monitor Relays Plate Mounted 24 VDC or 120 VAC shown is A2098 9735 2 Reference 2020 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision and are subject to change without notice listings may be applicable contact your local Autocall product supplier for the latest status Listings and approvals under Tyco Fire Security GmbH and the names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm Code are registered of the National Fire Protection Association NFPA Rev 5 1 2020