Autocall Non-Coded Manual Stations Wire Guard 2099-9800

UL ULC Approved Peripherals Manual Stations Wire Guard 2099 9800 guard for manual station applications subject to accidental contact Guard hinges at the top of its mounting plate access requires lifting guard and then activating manual station pull lever For use with surface mounted or semi flush mounted manual stations with the following Autocall manual station types Conventional non addressable manual stations refer to data sheet AC2099 0007 Conventional non addressable stations for Releasing Systems applications refer to data sheet AC2099 0010 Addressable manual stations refer to data sheet AC4099 0005 2099 9800 wire guard protects Autocall manual stations from damage due to accidental contact while providing easy access when actual alarm occur Retention of the guard in the closed position is provided by a protrusion of the guard mounting bracket Simply lifting up from the allows the guard to pivot on its top mounted hinge and provides access to the station activation handle Plate Dimensions Dimensions Wire Diameter Type Boxes Surface Mount Boxes 1 General 5 16 H x 4 W x 0.050 Thick 160 mm x 117 mm x 1.3 mm H x 4 W x 1 D 152 mm x 117 mm x 44 mm 2.36 mm 2 Mounting Compatibility use with surface or semi flush mounted manual stations not recessed or double gang electrical box select depth per station requirements 5 3 16 H x 4 W 132 mm x 102 mm Boxes are smaller than guard assembly guard plate will overlap 5 H x 3 W 127 mm x 98 mm product is not presently agency listed Contact your local Autocall product supplier for the latest status Rev 7 12 2019 station guard will fit onto surface mounted or semi flush mounted manual stations Flush mounted boxes providing a semi flush mounted station typically preferred since that mounting arrangement allows the guard to rest against the wall surface manual station and mounting box not included 1 2099 9800 Wire Guard 2019 Johnson Controls All rights reserved All specifications and other information shown were current as of document revision and are subject to change without notice listings may be applicable contact your local Autocall product supplier for the latest status Listings and approvals under Tyco Fire Security GmbH and the names listed in this material are marks and or registered marks Unauthorized use is strictly prohibited NFPA 72 and National Fire Alarm Code are registered of the National Fire Protection Association NFPA Rev 7 12 2019