Autocall Visible Notification Appliances with Speaker and Multi-Candela Strobe; NonAddressable

Datasheet Multi Candela Notification Appliances Notification Appliances with Speaker and Multi Candela Strobe Non Addressable ULC CSFM Listed FM S V notification appliances with multi tapped and multi tapped high intensity xenon strobe with flash Rugged high impact flame retardant thermoplastic housings are for wall or ceiling mount Operation is compatible with ADA requirements see Wall mount reference mount S V features Housings are available in red or white with clear lens with contrasting or red FIRE lettering Covers are available separately to convert housing color mount S V features Housing is white with clear lens Red FIRE lettering is printed on two sides notification appliance speaker High quality voice and tone reproduction with taps for 1 4 W 1 2 W 1 or 2 W at 25 VRMS or 70.7 VRMS Capacitor input for connection to supervised notification appliance Speakers are wired separately from strobe wiring UL listed to Standard 1480 and ULC S541 Compliant with NFPA 72 520 Hz Low Frequency Signal Requirements Sleeping Areas notification appliance strobe 24 VDC xenon strobe intensity is selectable as 15 30 75 or 110 with visible selection jumper secured behind strobe housing Strobes are activated from NACs selected to provide Autocall strobe signals or from separate strobe Synchronization that are available for Class B or Class A operation Regulated circuit design ensures consistent flash output and provides inrush current UL listed to Standard 1971 and ULC S526 for wall mounted S Vs Red or white adapters to cover surface mounted electrical boxes Red adapter for mounting to 2975 9145 boxes Red wire guard 1 Wall and ceiling mount S Vs TrueAlert S Vs with speaker and synchronized convenient installation to standard electrical boxes with The enclosure designs are both impact and vandal resistant provide a convenient strobe intensity selection You can select model for strobe intensity output This minimizes on site model and easily accommodates changes encountered during mount housings are a one piece assembly including lens that mounts to 4 in square electrical box with extension see Wall mount installation You can quickly remove the cover with a tool and covers are separately for color conversion mount also install using 4 in electrical boxes with an extension See Ceiling S V installation reference and 2905 9946 tile bridge dimensions intensity selection installation a selection plug at the back of the housing the desired strobe intensity An attached flag with black on a highly visible yellow background allows the selected intensity be seen at the side of the strobe lens This product has been approved by the California State Fire Marshal CSFM pursuant to Section 13144.1 of the California Health and Safety Code See CSFM Listings 7320 2269 0501 7320 2269 0502 7125 2269 0525 for allowable values and or conditions concerning material presented in this document Additional listings may be applicable contact your local product supplier for the latest Please refer to specific product listings on page 2 Rev 13 04 2021 Notification Appliances with Speaker and Multi Candela Strobe Non Addressable strobes strobes multiple strobes and their reflections can be seen from one location synchronized flashes reduce the probability of photo sensitive reactions well as the annoyance and possible distraction of random flashing The multi candela strobes of these S Vs are activated by NACs that provide the synchronization format For additional information refer to data sheet AC4905 0003 application selection selection of visible notification is dependent on occupancy location local codes and proper applications of the National Fire Alarm and Code NFPA 72 ANSI A117.1 the appropriate model building code BOCA ICBO or SBCCI and the application guidelines of the Americans Disabilities Act ADA selection Red White White White White Red FM FIRE ALERT UL FIRE UL mount red adapter skirt mount white adapter skirt 1 Wall mount multi candela S Vs dimensions with lens ULC FM Multi tapped Speaker with Multi Candela Synchronized strobe intensity selectable as 15 cd 30 cd 75 or 110 cd 1 4 in H x 5 in W x 2 5 8 in D 184 mm x 127 mm x 67 mm 2 Ceiling mount multi candela S V Speaker with Multi Synchronized Strobe intensity selectable as 15 30 cd 75 cd or 110 cd 7 1 2 in or 191 mm diameter 1 2 in or 13 mm lens protrusion 2 5 8 in or 67 mm above housing into box 2 3 4 in or 70 mm Plate red required to mount S V on 2975 9145 box red for surface or flush mount requires adapter plate A4905 9903 box may be available for retrofit applications 3 Wall mount S V adapters when mounting to surface electrical box 4 in square 1 2 in deep with 1 1 2 in deep 3 4 in H x 5 3 8 in W x 3 3 16 in D 197 mm x 137 mm x 81 mm with S V 5 7 8 in or 149 mm 5 16 in H x 5 3 4 in W x 0.060 in Thick 211 mm x 146 mm x 1.5 mm 7 8 in H x 5 1 8 in W x 2 3 4 in D 200 mm x 130 mm x 70 mm 4 Wall mount S V replacement covers S V cover with white FIRE lettering S V cover with red FIRE lettering 1 4 in H x 5 in W x 1 3 8 in D or 184 mm x 127 mm 35 mm 5 Synchronized flash control modules Flash Module Class B operation Flash Module Class A operation encapsulated with in out 18 or 0.82 mm2 wire leads rated 2 A NAC requires 5 mA for power 3 8 in W x 2 7 16 in L x 13 16 in or 35 mm x 62 mm x 20 mm Ceiling mount S V installation reference and 2905 9946 tile bridge Refer to data sheet AC4905 0003 for additional flash control module information Bridge 6 Ceiling mount tile bridge 2 Rev 13 04 2021 Notification Appliances with Speaker and Multi Candela Strobe Non Addressable specifications to 122 or 0 to 50 10 to 93 non condensing at 100 or 38 blocks for 18 AWG to 12 AWG or 0.82 mm2 to 3.31 mm2 two wires for each terminal for in out wiring 7 Common specifications voltage taps response 8 Speaker specifications VRMS or 70.7 VRMS see Note 1 W 1 2 W 1 W and 2 W Hz to 4000 Hz kHz to 12 kHz Alarm signaling output Ratings 10 ft or 3 m see Note tap Listed Models Reverberant Chamber Test per UL 1480 Mount Models A4906 9151 and A4906 9153 Anechoic Test per ULC S541 Dispersion Reference per ULC S541 Anechoic Testing dB 30 off axis W dBA dBA W dBA dBA W dBA dBA W dBA dBA dB 55 off axis 9 Strobe specifications voltage range rate and synchronized NAC loading dimensions with lens RMS current rating per strobe RMS currents at other VDC VDC dimensions RMS Current rating per strobe RMS currents at other VDC VDC 24 VDC 16 VDC to 33 VDC see Note 2 Hz with up to 35 synchronized strobes maximum for each NAC 1 4 in H x 5 in W x 2 5 8 in D or 184 mm x 127 mm x 67 mm cd mA mA mA housing 7 1 2 in or 191 mm diameter 1 2 in deep or 13 mm lens protrusion speaker housing 2 5 8 in or 67 mm depth into box 2 3 4 in or 70 mm cd mA mA mA cd mA mA mA cd mA mA mA cd mA mA mA cd mA mA mA cd mA mA mA cd mA mA mA Speakers are for connection to conventional fire alarm audio circuits Anechoic speaker output ratings are typically more representative of actual sound output The maximum RMS strobe current listed is the device nameplate rating Strobe designs are constant wattage and the