Cornell Communications 4000 Nurse Call Product Specification

Call 4000 Telephone & Intercommunication Equipment Specs document specifies nurse call equipment using lamp and electronic tone annunciation at a annunciator station to register calls from patient and other call-in stations as manufac- by Cornell Communications, Inc., Milwaukee, WI. 1 GENERAL SUMMARY Includes: Nurse call equipment using lamp and electronic tone annun- at a central annunciator station to register calls from patient and other call- stations. Note: Revise paragraph below to suit project requirements. Add section numbers and per CSI Master Format and specifier practice. Related Sections: Section(s) related to this section include: Division 16 Electrical Sections. Note: Article below may be omitted when specifying manufacturer proprietary prod- and recommended installation. Retain Reference Article when specifying products and in- by an industry reference standard. If retained, list standard(s) referenced in this section. issuing authority name, acronym, standard designation, and title. Establish policy for edition date of standard referenced. Conditions of the Contract or Division 1 Refer- Section may establish the edition date of standards. This article does not require compli- with standard, but is merely a listing of references used. Article below should list only those standards referenced in this section. REFERENCES Standards listed by reference, including revisions by issuing authority, a part of this specification section to extent indicated. Standards listed are by issuing authority, authority abbreviation, designation number, title or designation established by issuing authority. Standards subsequently refer- herein are referred to by issuing authority abbreviation and standard desig- & INTERCOMMUNICATION EQUIPMENT (Nurse Call) Underwriters Laboratories, Inc.: UL 1069 Hospital Signaling and Nurse Call Equipment. National Fire Protection Association (NFPA): NFPA 70 National Electrical Code. SYSTEM DESCRIPTION Requirements: Provide nurse call equipment, which has been and installed to maintain performance criteria stated by manufac- without defects, damage or failure. Note: Article below includes submittal of relevant data to be furnished by contractor during, or after construction. Coordinate this article with Architect and Contractor du- and responsibilities in Conditions of the Contract and Division 1 Submittal Section. SUBMITTALS Submit listed submittals in accordance with Conditions of the Contract Division 1 Submittal Procedures Section. Data: Submit product data, including manufacturer product sheet, for products. Drawings: Submit shop drawings showing layout, profiles and product including anchorage and accessories. Include cabling diagrams, wir- diagrams, station installation details, and equipment cabinet details. Quality Assurance Submittals: Submit the following: Reports: Certified test reports showing compliance with specified characteristics. Manufacturer Instructions: Manufacturer installation instructions. Note: Coordinate paragraph below with Part 3 Field Quality Requirements Article Retain or delete as applicable. Field Reports: Manufacturer field reports specified Closeout Submittals: Submit the following: and Maintenance Data: Operation and maintenance data for in- products in accordance with Division 1 Closeout Submittals (Main- & INTERCOMMUNICATION EQUIPMENT (Nurse Call) Data and Operation Data) Section. Include methods for maintain- installed products and precautions against cleaning materials and detrimental to finishes and performance. Include troubleshooting wiring terminal identification and equipment parts list. Warranty: Warranty documents specified herein. QUALITY ASSURANCE Qualifications: Installer experienced in performing work of this section has specialized in installation of work similar to that required for this project. Note: Paragraph below should list obligations for compliance with