Cornell Communications Bedside Stations B-111 B-113 & B-122

Stations with Call Cord or Push Button B-113, and B-122 Nurse Call 4000 Dual/Single Status UL-listed CORNELL Stations may be equipped with or two jacks (B-111, B-122) for use CORNELL Call Cords, or furnished push button operations (B-113). Red indicate calls placed. Calls may be at the touch of a button. of call cord plug from station a call at the system panel. Red LED indicate calls placed. Calls may be cancelled at the touch of a button. On and B-122; removal of call cord plug from station indicates a call at the system panel. The satin-finish stainless steel faceplates may be flush mounted on standard outlet with single-gang rings. The plates may also be surface mounted with Wiremold 5748 or Total depth required is 1 Specifications: The contractor shall furnish and install Cornell Bedside Stations as on the plans. The stations shall be equipped with (1) (2) jacks for use with CORNELL Cords or with push buttons, and with red LED call placed indicators and cancel switches. of bedside cord plug shall appear as a call on the Annunciator panel. Satin-finish steel faceplates shall have silk-screened designations clearly marked. Indicator voltage be 24 volts DC. Wall boxes shall be standard outlet boxes with single- or double-gang Information: Power Requirements: 24VDC Operating Environment: 50-120 Indoor Non-condensing Physical Faceplate Dimensions: 4 x 2 (Standard 1 Gang) Mounting: Single-Gang back box with 1 minimum depth Wiring: #22 AWG Minimum in 1-6 gang sizes: stations are only UL Listed in the 1 gang size For correct part number, change first number (1) to gang size needed