in Station, Push Button Nurse Call 4000 Dual/Single Status E-107 single-gang Emergency Stations feature satin finish steel faceplates with silk-screened designations. They may be mounted on standard outlet boxes with single-gang rings, or surface on Wiremold 5748 or equal with a depth requirement of 1 Used with the A-4000 series Annunciator panel as a room station for senior housing. Pushing the in button a light at the Annunciator. The satin finish stainless steel faceplate with silk-screened designations may be flush on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold or equivalent. Specifications: The contractor shall furnish and install the Cornell E-107 check-in as indicated on the plans. Faceplates shall be satin-finish stainless steel with silk-screened Call indicator shall be red LED and be replaceable from rear of unit. Incandescent are not acceptable. Stations shall be mounted on standard outlet boxes with single-gang rings Wiremold 5748 or equivalent. Information: Power Requirements: 24VDC Operating Environment: 50-120 Indoor Non-condensing Physical Faceplate Dimensions: 4 x 2 (1 Gang) Mounting: Single-Gang back box with 1 minimum depth Wiring: #22 AWG Minimum in 1-6 gang sizes: Change first number (1) to the gang size needed for correct part number.