Station, Toggle Switch Nurse Call 4000 Dual/Single Status Cornell Model E-105 Stations are typically used for initiation of of any desired priority. May be used as a nurse follower or emergency station. The On/Off toggle switch is used to place and cancel calls and red LED indicates call. The satin finish stainless steel faceplate with silk-screened designations may be flush on a standard outlet box with single-gang plaster ring, or surface mounted on a Wiremold or equivalent. Specifications: The contractor shall furnish and install Cornell Model E-105 stations at noted locations for use as emergency call or nurse follower stations. Faceplates shall be satin- stainless steel with silk-screened placed and designations clearly marked. Call shall be red light emitting diode. Incandescent lamps are not acceptable. On-off switch shall toggle. For flush mounting, back box shall be standard outlet box with single-gang plaster ring; for mounting, Wiremold 5748 or equivalent. Information: Power Requirements: 24VDC Operating Environment: 50-120 (0-60 Indoor Non-condensing Physical Faceplate Dimensions: 4 x 2 (1 Gang) Mounting: Single-Gang back box with 1 minimum depth Wiring: Minimum 22AWG in 1-6 gang sizes: Change first number (1) to gang size needed.