Wireless AURA 2.0 Controller The Cornell LC-064E Light Controller be used with AURA 2.0 has 0-9 flash rate codes. rates are used to determine the priority level a call, and a different flash rate can be applied to relay. Cornell LC-064E will control the flash rate of the lights connected to it when properly with AURA 2.0. Flash rate options are as followed: Off Flash 250ms On/ 250ms Off Flash 500ms On/ 500ms Off Flash 750ms On/ 250ms Off Flash 1000ms On/ 500ms Off Flash 1500ms On/ 500ms Off Flash 2000ms On/ 750ms Off Flash 250ms On/ 750ms Off Flash 3000ms On/ 1000ms Off On Surface mount enclosure. Specifications: The contractor shall install and program the light controller (LC-064E) predetermined specifications. The unit shall be installed inside included surface mount enclosure. shall test the unit using the test program to confirm proper operation of the light controller connecting a momentary switch assembly from terminal X8 on the PLC-PCU to the (-)0 of the incoming power terminal block. Each activation of the switch will cause the next to energize, continue the cycle through all 64 relays to insure proper operation, then the switch assembly. Information: Power Requirements: 24VDC Operating Environment: 50-120 Indoor Non-condensing Physical Dimensions: 15.5 x 18.5 x 4.25 Mounting: Surface Mount Wiring: #22 AWG Minimum
