Cornell Communications Master Panels A-1000

Door Monitor 1000 Series Panel Series Controls – tone mute push button accessible on faceplate. Volume control through the hole on faceplate. Push- zone control switches. Anodized aluminum surface, flush, or desktop mountable in multiples of four zones. For see ordering information. To indicate the status of each door to be monitored, the solid-state A-1000 panel individual zone circuits with push switches and integral LED indicators, one red one green for each zone. A steady green LED indicates unarmed status; steady red, armed flashing red and intermittent tone, alarm condition. Designation strips are provided for indications. Optional Key Switch for panel control. The anodized aluminum faceplate with silk-screened designations may be flush surface mounted, or desktop mounted with Cornell provided back box. Specifications: The contractor shall furnish and install a solid state CORNELL A-1000 Master Panel as shown on the plans. The surface, flush, or desktop mountable shall be made of anodized aluminum, and shall accommodate a specified number of circuits. Steady green LED shall indicate unarmed status; steady red, armed status; red and intermittent tone, alarm condition. An alarm shall sound upon opening of any in the armed status. Indicators shall be red and green LEDS; incandescent lamps are not Each master panel shall utilize CORNELL modular zone cards (A-1211, screw with CMOS integrated circuits. The faceplate shall feature tone mute switch, volume and zone switches. The panel shall operate on 12 volts DC regulated, with 36 mA per module. Field wiring terminals shall be to edge connector. Information: Power Requirements: 12VDC Operating Environment: 50-120 Indoor Non-condensing Mounting: Surface, Flush, or Desktop Wiring: #22 AWG Minimum SIZE BOX H x 13 W H x 19 W H x 19 W H x 19 W H x 19 W H x 19 W H x 19 W H x 11 W x 4 D H x 17 W x 4 D H x 17 W x 4 D H x 17 W x 4 D H x 17 W x 4 D H x 17 W x 4 D H x 17 W x 4 D