Cornell Communications Remote Monitor Panel A-1700

Remote Monitor Panel Series Monitor 1000 Series Remote Control Panel (A-1700 consists of anodized aluminum face surface-, flush- or desktop-mountable. green LEDs indicate unarmed status; red, armed status; flashing red with tone, an alarm condition. Zones are via plastic-covered designation strips. Used with the CORNELL Series A-1000 Door Monitor Systems, A-1700 panels with LEDs permit remote monitoring of individual zones within the system. The anodized aluminum faceplate with silk-screened designations may be flush surface mounted, or desktop mounted with Cornell provided back box. Specifications: The contractor shall furnish and install CORNELL A-1700 Remote Panels as shown on the plans for use with series A-1000 Door Monitor System. Each (surface-) (desktop-) mountable panel shall accommodate zone circuits. Indicators shall LEDs; incandescent lamps are not acceptable. Steady green LED shall indicate unarmed steady red, armed status; flashing red with intermittent tone, and alarm condition. Zones be designated with plastic-covered designation strips. Power shall be derived from the A- master panel at 12 volts DC, regulated. Each remote zone indication requires 17MA. Information: Power Requirements: 12VDC Operating Environment: 50-120 Indoor Non-condensing Mounting: Surface, Flush, or Desktop Wiring: #22 AWG Minimum SIZE x 10 W x 13 W x 13 W x 19 W BOX x 9 W x 3 x 12 x 3 x 12 x 3 x 17″W x 3