DSC 3G3070-CF - Spec Sheet - Eng - R003 - NA

HSPA Universal Commercial Alarm Communicator Features That Make a Difference Uses Automatically Compatible Full 4 4 SIM Activation PTM Compatible UL CSFM your DSC distributor 1 888 888 7838 technology from DSC 3G3070CF connects the alarm panel to the HSPA network reports alarm signals directly to monitoring station receiver System I IP II III IV 5 The uses the HSPA network ensure low cost high speed and alarm communications and is with control panels that using the Contact ID 3G3070CF is compliant the latest requirements for Methods as per and NFPA72 2010 and Editions It can be used in Monitoring applications as a communications technology which case any failure of the path shall be at the supervising station 5 minutes NFPA72 2010 or hour NFPA72 2013 of the failure it can be used as part of a multiple technologies for in conjunction with a DACT used as a back up provision be made to monitor the integrity each communication path and of any communications shall be annunciated at the station and at the premises within not more 24 hours of the failure it Works 3G3070CF can be used as a Sole Communicator or as a Communicator When being as a Sole Communicator the will replace the phone connection on the panel and soon as it detects that an alarm to be transmitted it will send alarm across the HSPA network When being used as a the communicator assesses connection to the PSTN phone and only in the event of a phone failure will it send all alarm traffic the HSPA network to the station instances where the control panel not support Contact ID the 11 1 2 x 10 x 3 cm x 25.4 cm x 7.62 cm Voltage 120 VAC Draw 300 mA Environment 32 to 120 F 0 to 48 C 12.8 lbs 5.8 kg has inputs pre set to transmit fire alarm fire or system trouble signals are transmitted directly without the need of clearinghouse to the IP linecard of the monitoring station Sur Gard System I II III IV 5 initializing the unit and initializing the 3G3070 can be done using automated telephone activation system VRU mobile or web user interface provided by CONNECT 24 special tools are required Listing 3G3070CF is UL listed under File S4019 Listing UOXX as a sole or backup communicator for Fire monitoring installations When used as sole communicator under NFPA72 2010 guidelines 3G3070CF will send its heartbeat once every 97 ensuring that three heartbeats will be received the supervising station within the 300 second window used as a sole communicator under NFPA72 guidelines the 3G3070CF will send its heartbeat every 5 minutes to monitor connectivity with the station within the 1 hour window When used a backup communicator the 3G3070CF will monitor the communication method DACT and send a daily test to the supervising station Listing 3G3070CF has been approved by the California State Marshal CSFM pursuant to Section 13144.1 of the Health and Safety Code Plan rate plans have been negotiated and are through authorized master resellers Contact your station or visit www connect24 com to find a reseller Information Universal Wireless Commercial Fire Alarm U S Model SIM Card product information specifications and availability subject to change without notice Certain names mentioned herein may be trade names and or registered trademarks other companies Tyco Security Products