DSC COMMUNIQUE v1 1 - Operation Manual - English - Communique Phone System

This manual contains information on limitations regarding product use and function and on the limitations as to liability of the manufacturer The entire manual should be W A R N I N G read Manual Version 1.1 WARRANTY Security Controls Ltd warrants the original purchaser that for a period of twelve from the date of purchase the product shall be free of defects in materials and under normal use During the warranty period Digital Security Controls shall at its option repair or replace any defective product upon return of the product its factory at no charge for labour and materials Any replacement and or repaired are warranted for the remainder of the original warranty or ninety 90 days which is longer The original owner must promptly notify Digital Security Controls Ltd in that there is defect in material or workmanship such written notice to be received all events prior to expiration of the warranty period Warranty warranty for international customers is the same as for any customer within Canada the United States with the exception that Digital Security Controls Ltd shall not be for any customs fees taxes or VAT that may be due Procedure obtain service under this warranty please return the item s in question to the point of All authorized distributors and dealers have a warranty program Anyone re goods to Digital Security Controls Ltd must first obtain an authorization number Security Controls Ltd will not accept any shipment whatsoever for which prior has not been obtained to Void Warranty warranty applies only to defects in parts and workmanship relating to normal use It not cover damage incurred in shipping or handling damage caused by disaster such as fire flood wind earthquake or lightning damage due to causes beyond the control of Digital Security Controls Ltd such as voltage mechanical shock or water damage damage caused by unauthorized attachment alterations modifications or foreign objects damage caused by peripherals unless such peripherals were supplied by Digital Secu Controls Ltd defects caused by failure to provide a suitable installation environment for the products damage caused by use of the products for purposes other than those for which it was damage from improper maintenance damage arising out of any other abuse mishandling or improper application of the products Security Controls Ltd liability for failure to repair the product under this war after a reasonable number of attempts will be limited to a replacement of the prod as the exclusive remedy for breach of warranty Under no circumstances shall Digital Controls Ltd be liable for any special incidental or consequential damages upon breach of warranty breach of contract negligence strict liability or any legal theory Such damages include but are not limited to loss of profits loss of the or any associated equipment cost of capital cost of substitute or replacement facilities or services down time purchaser time the claims of third parties customers and injury to property of Warranties warranty contains the entire warranty and shall be in lieu of any and all other whether expressed or implied including all implied warranties of mer or fitness for a particular purpose And of all other obligations or liabili on the part of Digital Security Controls Ltd Digital Security Controls Ltd neither nor authorizes any other person purporting to act on its behalf to modify or to this warranty nor to assume for it any other warranty or liability concerning product disclaimer of warranties and limited warranty are governed by the laws of the of Ontario Canada Digital Security Controls Ltd recommends that the entire system be com tested on a regular basis However despite frequent testing and due to but not to criminal tampering or electrical disruption it is possible for this product to fail perform as expected of Warranty Repairs Security Controls Ltd will at its option repair or replace out of warranty products are returned to its factory according to the following conditions Anyone returning to Digital Security Controls Ltd must first obtain an authorization number Digital Controls Ltd will not accept any shipment whatsoever for which prior authori has not been obtained which Digital Security Controls Ltd determines to be repairable will be repaired returned A set fee which Digital Security Controls Ltd has predetermined and which be revised from time to time will be charged for each unit repaired which Digital Security Controls Ltd determines not to be repairable will be by the nearest equivalent product available at that time The current market of the replacement product will be charged for each replacement unit COMPLIANCE STATEMENT Changes or modifications not expressly approved by Digital Security Controls Ltd could void your authority to use this equipment equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and used in accordance with the instructions may cause interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures Re orient the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio television technician for help user may find the following booklet prepared by the FCC useful to Identify and Resolve Radio Television Interference Problems This booklet is available from the U S Government Office Washington D C 20402 Stock 004 000 00345 4 INFORMATION equipment complies with Part 68 of the FCC Rules On the side of this equipment is a label that contains among other information the FCC registration number of this equipment TO TELEPHONE COMPANY The customer shall notify the telephone company of the particular line to which the connection will be made and provide the FCC registration and the ringer equivalence of the protective circuit Registration Number F53CAN 24626 MF E REN 1.4B Jack RJ11C CONNECTION REQUIREMENTS Except for the telephone company provided ringers all connections to the telephone network shall be made through standard plugs and telephone provided jacks or equivalent in such a manner as to allow for easy immediate disconnection of the terminal equipment Standard jacks shall be so arranged that if the plug connected thereto withdrawn no interference to the operation of the equipment at the customer premises which remains connected to the telephone network shall occur by reason of such withdrawal OF HARM Should terminal equipment or protective circuitry cause harm to the telephone network the telephone company shall where practicable notify the customer that temporary of service may be required however where prior notice is not practicable the telephone company may temporarily discontinue service if such action is deemed reasonable in the In the case of such temporary discontinuance the telephone company shall promptly notify the customer and will be given the opportunity to correct the situation TELEPHONE COMPANY INFORMATION The security control panel must be properly connected to the telephone line with a USOC RJ 31X telephone jack FCC prohibits customer provided terminal equipment be connected to party lines or to be used in conjunction with coin telephone service Interconnect rules may vary from state to state IN TELEPHONE COMPANY EQUIPMENT OR FACILITIES The telephone company may make changes in its communications facilities equipment operations or procedures such actions are reasonably required and proper in its business Should any such changes render the customer terminal equipment incompatible with the telephone company facilities the shall be given adequate notice to the effect modifications to maintain uninterrupted service EQUIVALENCE NUMBER REN The REN is useful to determine the quantity of devices that you may connect to your telephone line and still have all of those devices ring when your number is called In most but not all areas the sum of the RENs of all devices connected to one line should not exceed five 5.0 To be certain of the number of devices that you may connect your line you