DSC Cross zoning PC1616 1832 1864 V4 2

Notes Cross Zoning Power Series PC1616 1832 1864 V4.2 SERIES PC1616 1832 1864 V4.2 Zoning is used for Burglary Verification This feature requires two or more trip on a zone s as within a specific time before starting an alarm sequence a zone with the Cross Zoning Attribute Enabled is violated nothing occurs on the local premise and Cross Zoning Timer commences If another zone with the cross zoning attribute enabled is violated the timer expires the panel will transmit the first alarm signal a cross zone event followed by the zone alarm and begins the appropriate local alarm sequence If no other zones are violated before timer expires no alarm sequence occurs and an Not Verified even is logged and transmitted Hit Feature is enabled the panel will react on two violations of the same zone during the Cross Timer for starting an alarm sequence Cross Zoning has three step process four if Double Hit is required the Zone zone attributes the Cross Zone feature the Cross Zone Timer Optional the Double Hit option Optional Sections 101 164 018 Option 6 On 176 017 Option 4 On Attributes Zone Option Zone Timer Optional Hit Option Optional 1 Zone Attributes panel must be told which zones are included in the Cross Zoning feature Turn Option 9 ON for all Zoning zones in Sections 101 to 164 two sets of attributes 1 8 and 9 16 may be toggled by pressing within any zone attribute section If Ready LED is on the keypad is indicating Zone Attribute 1 8 if the Ready AND Armed LED are on the is indicating Zone Attribute 9 16 2 Cross Zoning Option enable Cross Zoning turn Option 6 ON in Section 018 3 Optional Cross Zoning Timer Zoning zones need to enter alarm within the Cross Zone Timer seconds duration before the will go into the appropriate alarm sequence and will communicate both zone alarms If two zones do enter alarm within the Cross Zone Timer duration the panel will only communicate the not signal to central station the Cross Zoning Timer in Section 176 The Default is 060 seconds Page 12 4 Optional Double Hit Option enable Double hit turn Option 4 ON in Section 017 Test the partition and violate one Cross Zoning zone Ensure the panel does not enter into alarm Violate a Cross Zoning zone Ensure the panel starts the alarm sequence Page 13