DSC Escort Basic PC1616 1832 1864 V4 2

Notes ESCORT Module Basic PC1616 1832 1864 V4.2 SERIES PC1616 1832 1864 V4.2 Module ESCORT5580 TC module will turn any touch tone phone either local or remote into a fully functional The model supports thermostat control basic ESCORT operation is a seven step process the ESCORT Service Code the partitions to be enabled the Status Prompt Mask the Star Function Prompt Mask the Local Programming Lockout the Local Remote Phone Access Code the Phone Access Options Sections Section 001 Section 002 Section 003 Section 004 Section 005 to 006 Section 020 Section 021 Service Code First System Options Status Prompt Mask Star Function Prompt Mask Local Programming Lockout Local Remote Phone Access Code Phone Access Options enter ESCORT programming perform the following on any local touchtone phone on any local touchtone phone Turn the ESCORT ON 8 ESCORT Service Code ESCORT programming The default Service Code is 5580 1 Service Code a new 4 digit Service Code in ESCORT Section 001 2 First System Options Section 002 is used to select which partitions can be accessed To allow the user to access 1 turn Option 1 ON To allow the user to access Partition 2 turn Option 2 ON 3 Status Prompt Mask messages can be deleted from the ESCORT to help reduce confusion to the end user Turn the Option OFF in ESCORT section 003 to disable unwanted messages Page 19 4 Star Function Prompt Mask function messages can be deleted from the ESCORT if they are not applicable to the installation example if automatic arming is not being used deleting these messages can help reduce confusion and questions Turn the corresponding option OFF in ESCORT Section 004 to disable unwanted 5 Local Programming Lockout ESCORT can be programmed to after an incorrect number of Service Codes are entered the number of incorrect Service Codes required for a to occur in ESCORT Section 005 the number of minutes for the duration in ESCORT Section 006 While in the will not allow local programming even if the correct Service Code is entered 6 Local Remote Phone Access Code answering machines use the key as a function key and may interfere with the command to turn the ESCORT ON If this is the case reprogram the Local Remote Access Code in ESCORT 020 Ensure that a or is programmed in the code 7 Phone Access Options Section 021 is used to determine access to the ESCORT If only local access is required turn 1 ON If both local and remote access is required turn Option 1 OFF valid access code is always required to access the ESCORT remotely If an access code is required to the ESCORT locally or if the system has two Partitions and access is needed to both via the turn Option 2 ON in ESCORT Section 021 If the system has only one Partition and an access is not required for local access turn Option 2 OFF Tips All ESCORT programming is done through an on site touchtone telephone or via the downloading To program labels into the ESCORT refer to Application Notes ESCORT Module Labels a phone line trouble is preset the ESCORT will provide 20mA loop current so that the system still be accessed through a local phone Test up a local phone and enter the Access Code default The ESCORT will pick up say Perform various keypad functions to ensure ESCORT is properly operating Page 20