DSC GS3060 - Installation Manual - English

GS3060 INTERFACE MANUAL This manual contains information on limitations regarding product and function and information on the limitations as to liability of the manu The entire manual should be carefully read OF CONTENTS 1 1 Specifications 1 1 of Parts 2 3 the GS3060 4 the GS3060 4 LEDS 5 Principles 6 Landline Mode 6 Transmission Monitoring PTM 6 Sequence 6 6 7 the Outputs 7 Shutdown 7 Default 7 Power Radio Shutdown 8 24 Remote Programming 8 Guide 8 Wiring Diagrams 12 wiring equipment is fixed wall mounted and shall be installed in the position specified in instructions The equipment enclosure must be fully assembled and closed with the necessary screws tabs and secured to a wall before operation be routed in a manner that prevents Excessive strain on wire and on terminal connections Loosening of terminal connections Damage of conductor insulation Never install this equipment during a lightning storm the end user to Not attempt to service this product Opening or removing covers may expose the user dangerous voltages or other risks Any servicing shall be referred to trained service only Use authorized accessories only with this equipment not dispose of the battery in fire or water Disposing of the battery in a fire will cause and explosion not dispose of the waste battery as unsorted municipal waste Consult your local and or laws regarding recycling with regard to this lithium battery pack Doing will help protect the environment Some of the materials that are found within the bat could become toxic if not disposed of properly and may affect the environment GS3060 is a wireless communicator that sends alarm system information to an SG System III SG II or SG System I receiver through a GSM GPRS wireless network This wireless communicator can used with UL ULC Listed compatible control units as indicated in the manufacturer installation The GS3060 is designed to work with the Contact ID communication format as described in SIA DC Standard Before completing the field installation of the alarm monitoring system please ensure com with the supervising central station is successful by sending several events and getting confir that they have been received Compatible with 4 digit or 10 digit Contact ID communication format as described in SIA DC 05 Example of suitable compatible alarm panels DSC Models PC1864 PC1832 PC1616 Simulates landline Switches automatically to the GSM network in the event of landline trouble e g line down GSM Signal Indicator Four programmable outputs Contains one 12V 1.2 Ah battery Case Tamper Output Landline overvoltage protection Dual band GSM radio Four programmable inputs GPRS Internet communication with Sur Gard System III II Panel transmission monitoring for up to four phone numbers 13.8VDC required 13.8VDC recommended Specifications input voltage to the GS3060 can be drawn from the UL ULC Listed control panel or provided by an UL ULC Listed power supply rated for the application external power limited source The power supply must be Class II Power Limited For residential applications a suitable power adap is model DSC ADP1310 NAU for USA and model DSC ADP1310 NA for Canada Supply Ratings Input Voltage for long term operation with internal battery without internal battery When the input voltage drops below 13.5VDC the internal battery supplied with the GS3060 not be charged In order to maintain a charged level for the internal battery the power supply have a minimum voltage of 13.5VDC to ensure a sufficient battery charge in all conditions of use Consumption with internal battery without internal battery Plus any current drawn from the GS3060 AUX terminal Voltage Range charging voltage charging current Battery must be replaced every 3 5 years frequency gain Specifications temperature Specifications metal enclosure painted without battery Event Buffer communications Telco Loop specifications TIP RING Voltage Current Resistance construction enclosure GS3060RF alternate construction enclosure without battery 9 14VDC sealed rechargeable type rated 12V 1.2Ah or 12VAh for 24hr standby time 13.5VDC 50mA 138mm x 224mm x 55mm 5.4 x 8.8 x 2.2 900g 3.2oz 256 Events not viewable 165mm x 257mm x 76mm 6.3 x 10.1 x 3 1300g 2.8lbs 0 32 93 RH Maximum non condensing 35VDC 25mA 600 Ohms 850 1900MHz 2.0dBi 120mA 500mA Figure 1 Parts of Parts 5 ON wrap O3 O4 OC AS 13 20 DC IN L1 L2 L3 L4 12V