DSC HS-BB100 - Installation Manual - English - Concourse Right Side Battery Bracket
File Preview
Click below to download for free
Click below to download for free
File Data
Name | dsc-hs-bb100-installation-manual-english-concourse-right-side-battery-bracket-5396720841.pdf |
---|---|
Type | |
Size | 713.40 KB |
Downloads |
Text Preview
Warranty Security Controls Ltd warrants that for a period of 12 months from the date of purchase the product be free of defects in materials and workmanship under normal use and that in fulfilment of any breach of warranty Digital Security Controls Ltd shall at its option repair or replace the defective equipment upon of the equipment to its repair depot This warranty applies only to defects in parts and workmanship not to damage incurred in shipping or handling or damage due to causes beyond the control of Digital Controls Ltd such as lightning excessive voltage mechanical shock water damage or damage out of abuse alteration or improper application of the equipment foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other whether expressed or implied and of all other obligations or liabilities on the part of Digital Security Ltd Digital Security Controls Ltd neither assumes nor authorizes any other person purporting to act its behalf to modify or to change this warranty nor to assume for it any other warranty or liability concerning product no event shall Digital Security Controls Ltd be liable for any direct indirect or consequential damages loss anticipated profits loss of time or any other losses incurred by the buyer in connection with the purchase or operation or failure of this product detectors can only detect motion within the designated areas as shown in their respective installation They cannot discriminate between intruders and intended occupants Motion detectors do not volumetric area protection They have multiple beams of detection and motion can only be detected unobstructed areas covered by these beams They cannot detect motion which occurs behind walls ceilings closed doors glass partitions glass doors or windows Any type of tampering whether intentional or such as masking painting or spraying of any material on the lenses mirrors windows or any part of the detection system will impair its proper operation infrared motion detectors operate by sensing changes in temperature However their effectiveness can reduced when the ambient temperature rises near or above body temperature or if there are intentional or sources of heat in or near the detection area Some of these heat sources could be heaters stoves barbeques fireplaces sunlight steam vents lighting and so on Digital Security Controls Ltd recommends that the entire system be completely tested a regular basis However despite frequent testing and due to but not limited to criminal or electrical disruption it is possible for this product to fail to perform as expected INFORMATION Changes or modifications not expressly approved by Digital Security Ltd could void the user authority to operate this equipment Home Systems is a division of Digital Security Controls Ltd Digital Security Controls Ltd Canada 1 800 387 3630 www dsc com in Canada 29005199 R003 Bracket Instructions HS BB100 HS BB101 Battery Bracket is for use with the DSC Concourse Home Wiring Solution The HS BB100 allows a battery to be placed anywhere on the side of any HS CAB cabinet that has a center raceway The HS BB101 allows a to be placed anywhere on the left side of any HS CAB cabinet The maximum size is 6 x 4 x 2 of Package package contains the following parts one HS BB100 or one HS BB101 Instructions Locate a suitable mounting location for the bracket inside the cabinet Align the two mounting tabs with the holes in the wire raceway and insert as per Figure A Snap the bracket into place by pushing the opposite side towards the back of the Place the battery on the bracket A There should be a minimum spacing of 1 inches between the top of the battery bracket and mounting plate above in order to leave enough room to remove the battery without the battery bracket If two battery brackets are used there should be a minimum of 1 inches between them The HS BB100 battery bracket cannot be used with the model HS CAB100 Security Controls Ltd warrants that for a period of 12 months from the date of purchase the product be free of defects in materials and workmanship under normal use and that in fulfilment of any breach of warranty Digital Security Controls Ltd shall at its option repair or replace the defective equipment upon of the equipment to its repair depot This warranty applies only to defects in parts and workmanship not to damage incurred in shipping or handling or damage due to causes beyond the control of Digital Controls Ltd such as lightning excessive voltage mechanical shock water damage or damage out of abuse alteration or improper application of the equipment foregoing warranty shall apply only to the original buyer and is and shall be in lieu of any and all other whether expressed or implied and of all other obligations or liabilities on the part of Digital Security Ltd Digital Security Controls Ltd neither assumes nor authorizes any other person purporting to act its behalf to modify or to change this warranty nor to assume for it any other warranty or liability concerning product no event shall Digital Security Controls Ltd be liable for any direct indirect or consequential damages loss anticipated profits loss of time or any other losses incurred by the buyer in connection with the purchase or operation or failure of this product detectors can only detect motion within the designated areas as shown in their respective installation They cannot discriminate between intruders and intended occupants Motion detectors do not volumetric area protection They have multiple beams of detection and motion can only be detected unobstructed areas covered by these beams They cannot detect motion which occurs behind walls ceilings closed doors glass partitions glass doors or windows Any type of tampering whether intentional or such as masking painting or spraying of any material on the lenses mirrors windows or any part of the detection system will impair its proper operation infrared motion detectors operate by sensing changes in temperature However their effectiveness can reduced when the ambient temperature rises near or above body temperature or if there are intentional or sources of heat in or near the detection area Some of these heat sources could be heaters stoves barbeques fireplaces sunlight steam vents lighting and so on Digital Security Controls Ltd recommends that the entire system be completely tested a regular basis However despite frequent testing and due to but not limited to criminal or electrical disruption it is possible for this product to fail to perform as expected INFORMATION Changes or modifications not expressly approved by Digital Security Ltd could void the user authority to operate this equipment Home Systems is a division of Digital Security Controls Ltd Digital Security Controls Ltd Canada 1 800 387 3630 www dsc com in Canada 29005199 R003 Bracket Instructions HS BB100 HS BB101 Battery Bracket is for use with the DSC Concourse Home Wiring Solution The HS BB100 allows a battery to be placed anywhere on the side of any HS CAB cabinet that has a center raceway The HS BB101 allows a to be placed anywhere on the left side of any HS CAB cabinet The maximum size is 6 x 4 x 2 of Package package contains the following parts one HS BB100 or one HS BB101 Instructions Locate a suitable mounting location for the bracket inside the cabinet Align the two mounting tabs with the holes in the wire raceway and insert as per Figure A Snap the bracket into place by pushing the opposite side towards the back of the Place the battery on the bracket A There should be a minimum spacing of 1 inches between the top of the battery bracket and mounting plate above in order to leave enough room to remove the battery without the battery bracket If two battery brackets are used there should be a minimum of 1 inches between them The HS BB100 battery bracket cannot be used with the model HS CAB100